Setting capture modes for Axis units - Security Center 5.9.4.0

Security Center Video Unit Configuration Guide 5.9.4.0

series
Security Center 5.9.4.0
revised_modified
2020-11-05

For Axis cameras that support multiple capture modes, you must configure the capture mode on the unit’s web page before adding the unit to Security Center.

What you should know

The UI can vary depending on the firmware version. The capture mode setting can be found under the Camera settings or Image tab.

Procedure

  1. Open the unit's web page.
  2. Click Settings > Image tab.
  3. Set the resolution from the Capture mode setting.
  4. Click Save.