Changing the default administrator password for the Synergis™ appliance (Basic, Advanced) - Security Center 5.9

Security Center Hardening Guide 5.9

series
Security Center 5.9
revised_modified
2020-11-30

Before you deploy the Synergis™ unit in the field, it is recommended that you change the default administrator password.

What you should know

  • If you are logging on to the Synergis™ unit for the first time, the default username and password are admin and softwire.
  • The new password should be long, unique, and random.
    NOTE: You can review the strength of your Synergis™ unit password in the Config Tool Hardware inventory task.

Procedure

  1. Log on to the Synergis™ unit.
  2. Click Configuration > Users.
  3. On the Users page, select the admin user.
  4. Enter the old password, and then enter and confirm the new password.
  5. Click Save.

Results

The new password is applied immediately.

After you finish

If the unit was already connected to an Access Manager role, then change the logon password in Config Tool to synchronize the Synergis™ unit with the Access Manager.