Supported plugins in Security Center
Before installing or upgrading your Genetec™ plugin or extension, we recommend that you consult the product compatibility list for your integration.
Product compatibility indicates that the product supports and can run with specific
versions of other products. A product is compatible when it meets one of the following
certification levels:
- Certified
- Genetec Inc. has tested and validated the product.
- Supported by design
- The product has similar characteristics or is a newer version of a certified
version, but Genetec Inc. has not tested or validated the product.NOTE: Minor versions of a major release are supported by design. For example, if 5.11.1.0 is listed, then subsequent 5.11.n.0 are supported by design. If a major release is not listed, then it is not supported.
To be eligible for technical support, you must install the Security Center and third-party software versions that are listed as certified or supported by design in the following table.
For a list of plugins that have reached end-of-sale or end-of-life, refer to Product Lifecycle page on GTAP.
Barcode and QR scanning
The following barcode and QR scanning plugin is compatible with the Security Center versions and products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| TagTracker 3.0 |
Certified:
Supported by design:
|
5.8, 5.9, 5.10 and 5.11 |
Biometrics
The following biometrics plugin is compatible with the Security Center versions and products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Morpho Biometrics 3.1 | Certified: MorphoManager 9.8.6, 14.6.0.23, and 15.3 | 5.8, 5.9, 5.10, 5.11 and 5.12 |
Displays and video walls
The following display and video wall plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Barco CMS 4.2 |
Certified:
|
5.8, 5.9, 5.10 and 5.11 |
| EIZO Video Wall 3.3.0 | For a list of supported versions, see the Genetec Inc. supported device list. | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| Video Wall 3.2.0 | For a list of supported versions, see the Genetec Inc. supported device list. | 5.8, 5.9, 5.10, and 5.11 |
| Video Wall 3.1 | For a list of supported versions, see the Genetec Inc. supported device list. | 5.8, 5.9 and 5.10 |
Elevator destination dispatch
The following elevator destination dispatch plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| KONE Destination Dispatch 3.0.1 | Certified: KONE Polaris 800/900 and KONE Destination 820/880 for GCAC 1 protocol support | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| KONE Destination Dispatch 3.0 | Certified: KONE Polaris 800/900 and KONE Destination 820/880 for GCAC 1 protocol support | 5.8, 5.9, 5.10 and 5.11 |
| MCE Sentry Destination Dispatch 3.0.0 | Certified: MCE Security Protocol Specification Revision 17 | 5.10.4.0, 5.11 and 5.12 |
| Otis Compass 3.2.1 | Certified: Otis CompassPlus™ ICD (Interface Control Document) version 1.0, 2.1, 2.2, 3.0, and 3.1 | 5.10.4, 5.11 and 5.12 |
| Otis Compass 3.2 | Certified: Otis CompassPlus™ ICD (Interface Control Document) version 1.0, 2.1, 2.2, 3.0, and 3.1 | 5.8, 5.9 and 5.10 |
| Schindler PORT Elevator 3.0 | Certified: Schindler PORT communications protocol V1.3 | 5.8, 5.9, 5.10, and 5.11 |
| Thyssenkrupp 3.2.0 |
|
5.8, 5.9, 5.10, 5.11 and 5.12 |
| Thyssenkrupp 3.1 |
|
5.8, 5.9 and 5.10 |
Evacuation management
The following evacuation management plugins are compatible with the Security Center versions and products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Evacuation Assistant 1.4.0 | Certified: Coppernic C-One² mobile readers | 5.10, 5.11 and 5.12 |
| Evacuation Assistant 1.3.0 | Certified: Coppernic C-One² mobile readers | 5.10 and 5.11 |
| Evacuation Assistant 1.2.0 | Certified: Coppernic C-One² mobile readers | 5.10 |
| Evacuation Assistant 1.1.1 | Certified: Coppernic C-One² mobile readers | 5.10 |
| Mustering 3.2 | Not applicable |
5.8, 5.9, 5.10, 5.11 and 5.12
Bundled with Security Center 5.10.1.0 and later. |
| Mustering 3.1 | Not applicable |
5.8, 5.9, 5.10 and 5.11
Bundled with Security Center 5.9.1.0 and later 5.9.x releases. |
| Mustering 3.0 | Not applicable |
5.8, 5.9 and 5.10
Bundled with Security Center 5.9.0.0. |
Evidence management
The following evidence management plugin is compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Clearance plugin 3.5.98.0 | Not applicable | 5.9, 5.10, 5.11, and 5.12 |
| Clearance plugin 3.5.63.0 | Not applicable | 5.9, 5.10, 5.11, and 5.12 |
| Clearance plugin 3.5.47.0 | Not applicable | 5.9, 5.10, 5.11, and 5.12 |
| Clearance plugin 3.5.38.0 | Not applicable | 5.9, 5.10, and 5.11 |
| Clearance plugin 3.5.14.0 | Not applicable | 5.9, 5.10, and 5.11 |
| Clearance plugin 3.4.1.0 | Not applicable | 5.9, 5.10 and 5.11 |
| Clearance plugin 3.4 | Not applicable | 5.8, 5.9 and 5.10 |
| Clearance plugin 3.3 | Not applicable | 5.8, 5.9 and 5.10 |
| Clearance plugin 3.2 | Not applicable | 5.8, 5.9 and 5.10 |
Guard tour
The following guard tour plugin is compatible with the Security Center versions and products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| SPS CheckPoint 3.0 | Not applicable | 5.8, 5.9, 5.10, 5.11 and 5.12 |
Gunshot detection
The following gunshot detection plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| SDS Guardian 3.2.0.0 |
Certified:
Supported by design:
|
5.9, 5.10, 5.11 and 5.12 |
| SDS Guardian 3.1.1.0 |
Certified:
Supported by design:
|
5.8, 5.9, 5.10, 5.11 and 5.12 |
| ShotSpotter Gunshot Detection 3.0 | Certified: SST Notification API Release 2.7.3 | 5.5 SR5, 5.6, and 5.7 |
Identity management
The following identity management plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Advanced Enrollment 3.2.0 |
Certified:
|
5.10.4.0, 5.11, and 5.12 |
| Advanced Enrollment 3.1 |
Certified:
|
5.8.1, 5.9, 5.10, 5.11 and 5.12 |
| Airport Badging Solution 3.1 |
Certified:
|
5.9.3 to 5.11 |
| Airport Badging Solution 3.0 |
Certified:
|
5.9.3 to 5.10 |
| Card Synchronization 4.0.0 |
Certified for on-premise deployments:
|
5.10, 5.11 and 5.12 |
| Card Synchronization 3.4.2 |
Certified for on-premise deployments:
|
5.9, 5.10 and 5.11 |
| Card Synchronization 3.4.1 |
Certified for on-premise deployments:
|
5.9, 5.10 and 5.11 |
| Card Synchronization 3.4.0 |
Certified for on-premise deployments:
|
5.9, 5.10 and 5.11 |
| Card Synchronization 3.2 |
Certified for on-premise deployments:
|
5.8, 5.9, 5.10 and 5.11 |
| Genetec ClearID™ plugin | Not applicable | 5.10 and later |
| Genetec™ Enhanced Cardholder Management 1.0.0 | Not applicable | 5.10.3 |
| ID Scanner 3.3.0 | Multiple ID Scanner devices. See release notes. | 5.10.4.0, 5.11 and 5.12 |
| ID Scanner 3.2.1 | Multiple ID Scanner devices. See release notes. | 5.9, 5.10, 5.11 and 5.12 |
| ID Scanner 3.2.0 | Multiple ID Scanner devices. See release notes. | 5.9, 5.10 and 5.11 |
| ID Scanner 3.1 | Multiple ID Scanner devices. See release notes. | 5.8, 5.9 and 5.10 |
| Security Center Office Manager 3.0 | Not applicable | 5.8, 5.9, 5.10 and 5.11 |
Integrated access control
The following integrated access control plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| AMAG Symmetry 3.2.0 |
Certified:
|
5.10.4.0, 5.11 and 5.12 |
| AMAG Symmetry 3.1 |
Certified:
|
5.8, 5.9, 5.10 and 5.11 |
| ASSA ABLOY ARX 3.0 | Certified: ARX version 4.1.2 | 5.5, 5.6, and 5.7 |
| CCURE 9000 Access Control 3.8.0 | Certified: Software House CCURE 9000 2.90 and 3.0 | 5.10.2, 5.10.3, 5.10.4, 5.11 and 5.12 |
| CCURE 9000 Access Control 3.7.1 | Certified: Software House CCURE 9000 2.90 and 3.0 | 5.10.2, 5.10.3, 5.10.4 and 5.11 |
| CCURE 9000 Access Control 3.7.0 | Certified: Software House CCURE 9000 2.90 | 5.10.2, 5.10.3, 5.10.4 and 5.11 |
| CCURE 9000 Access Control 3.6.1 |
Certified: Software House CCURE 9000 2.60, 2.70, and
2.80
Supported by design:
|
5.8, 5.9, 5.10 and 5.11 |
| CCURE 9000 Access Control 3.6 |
Certified: Software House CCURE 9000 and Software House
CCURE 9000 Enterprise 2.60, 2.70, and 2.80
Supported by design:
|
5.8, 5.9, 5.10 and 5.11 |
| CCURE 9000 Access Control 3.5 |
Certified: Software House CCURE 9000 and Software House
CCURE 9000 Enterprise 2.60 and 2.70
Supported by design:
|
5.8 and 5.9 |
| CCURE 9000 Video Integration 3.7.1 | Certified: Software House CCURE 9000 2.90, and 3.0 | 5.10.4.19, 5.11.3.7, and 5.12 |
| CCURE 9000 Video Integration 3.7.0 | Certified: Software House CCURE 9000 2.90 | 5.8.4, 5.9, 5.10 and 5.11 |
| CCURE 9000 Video Integration 3.5 |
Certified: Software House CCURE 9000 2.60, 2.70, and
2.80 Supported by design: Software House CCURE 9000 2.30, 2.40, and 2.50 |
5.8, 5.9 and 5.10 |
| Lenel Video Translator 4.1.0 | Certified: 8.1 | 5.11 |
| Lenel Video Translator 4.0 | Certified:7.6, and 8.0 | 5.8, 5.9, and 5.10 |
| OnGuard 5.1.3 | Certified: 8.0 and 8.1 | 5.10.4.0 and 5.11 |
| OnGuard 5.1.2 | Certified: 8.0 and 8.1 | 5.10.4.0 and 5.11 |
|
Certified: 7.6 Update 2 NOTE: This version resolves an
issue that prevented offline event forwarding from the OnGuard system to the OnGuard
plugin.
|
5.11 | |
| OnGuard 5.1.1 | Certified: 8.0 and 8.1 | 5.10 and 5.11 |
|
Certified: 7.6 Update 2 NOTE: This version resolves an
issue that prevented offline event forwarding from the OnGuard system to the OnGuard
plugin.
|
5.11 | |
| OnGuard 5.1.0 |
Supported by design: 7.6 Update 2 NOTE: This version
resolves an issue that prevented offline event forwarding from the OnGuard system to
the OnGuard plugin.
|
5.9 and 5.10 |
| Supported by design: 8.0 | 5.10 | |
| Supported by design: 7.6 Update 2 and 8.0 | 5.11 | |
| OnGuard 5.0 |
Certified: 7.6 Update 2 NOTE: This version resolves an
issue that prevented offline event forwarding from the OnGuard system to the OnGuard
plugin.
|
5.9 |
| Certified: 8.0 | 5.10 | |
| SALTO Virtual Network (SVN) 3.3.0 |
Certified:
|
5.8.1.1, 5.9, 5.10, 5.11 and 5.12 |
| SALTO Virtual Network (SVN) 3.2 |
Certified:
|
5.8.1.1, 5.9 and 5.10 |
| Siemens SiPass 3.4.0 | Certified: SiPass Integrated 2.90 | 5.10.4 and later |
| Siemens SiPass 3.3 | Certified: SiPass Integrated 2.70 and 2.75 | 5.8, 5.9, 5.10 and 5.11 |
| Siemens SiPass 3.2 | Certified: 2.65 | 5.5, 5.6, and 5.7 |
Integrated automatic license plate recognition systems
The following Integrated automatic license plate recognition system plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Third-Party ALPR 5.10.3.0 |
|
5.10 and later NOTE: Some features require
adequate versions of Fleet Monitoring and Third-Party ALPR.
|
Intelligent keys
The following intelligent key plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| ASSA ABLOY CLIQ 3.0 | Certified: CLIQ Web Manager 9.0.2 build 51198 | 5.8.1, 5.9.2, 5.10, 5.11 and 5.12 |
| iLOQ 5 Series Digital Locking System 1.0.0 | Not applicable | 5.9.4.5, 5.10.4, 5.11 and 5.12 |
| Medeco XT Intelligent Keys 3.1.0 |
Certified:
|
5.9, 5.10, 5.11 and 5.12 |
| Medeco XT Intelligent Keys 3.0 |
Certified:
|
5.8.1.1, 5.9, 5.10 and 5.11 |
Intrusion monitoring
The following intrusion monitoring plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Bosch intrusion panel extension 5.0.0 for Genetec™ Intrusion Protocol |
Certified:
|
5.10, 5.11 and 5.12 |
| Bosch intrusion panel extension 4.4.1 | See the Bosch Intrusion Panel Extension Guide for supported devices
and firmware versions. NOTE: UL 864 Fire Application mode is incompatible with this
integration and not supported.
|
5.8, 5.9, 5.10 and 5.11 |
| Bosch intrusion panel extension 4.4 | See the Bosch Intrusion Panel Extension Guide for supported devices and firmware versions. | 5.8, 5.9 and 5.10 |
| Bosch Map 5000 intrusion panel 3.0 |
Certified:
|
5.8, 5.9, 5.10 and 5.11 |
| BuyTime 3.0 | Not applicable | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| DSC PowerSeries extension 4.0 | Certified: PC1864 version 4.6, firmware 1.1.2 | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| DMP intrusion panel extension 4.4.0 |
Certified:
NOTE: DMP panels programmed for fire or mixed fire/intrusion operation are not
supported by this integration.
|
5.10.4.0, 5.11 and 5.12 |
| DMP intrusion panel extension 4.3.0 |
Certified:
Supported by design:
NOTE: DMP panels programmed for fire or mixed fire/intrusion operation are
not supported by this integration.
|
5.9, 5.10, 5.11 and 5.12 |
| DMP intrusion panel extension 4.2.2 |
Certified:
Supported by design:
NOTE: DMP panels programmed for fire or mixed fire/intrusion operation are
not supported by this integration.
|
5.8, 5.9, 5.10 and 5.11 |
| DMP intrusion panel extension 4.2.1 |
Certified:
Supported by design:
NOTE: DMP panels programmed for fire or mixed fire/intrusion operation are
not supported by this integration.
|
5.8, 5.9, 5.10 and 5.11 |
| DMP intrusion panel extension 4.1 |
Certified:
Supported by design:
NOTE: DMP panels programmed for fire or mixed fire/intrusion operation are
not supported by this integration.
|
5.8, 5.9 and 5.10 |
|
DMP
(Built into Security Center) |
Depends on your Security Center version. See the Security Center Release Notes for supported devices and firmware versions. | 5.8 |
| Honeywell Galaxy intrusion panel extension 3.2.0 |
Certified:
|
5.8, 5.9, 5.10, 5.11 and 5.12 |
| Honeywell Galaxy intrusion panel extension 3.1 |
Certified:
|
5.8, 5.9, 5.10 and 5.11 |
| Honeywell Galaxy intrusion panel extension 3.0 |
Certified:
|
5.8, 5.9 and 5.10 |
|
Honeywell Galaxy Dimension
(Built into Security Center) This product is no longer available for sale. We only provide support for panels added to existing deployments. For a new Security Center system, order the Honeywell Galaxy intrusion panel extension 3.0 or later. |
Depends on your Security Center version. See the Honeywell Galaxy Dimension Control Panel Integration Guide for a list of supported devices and firmware versions. | 5.8 |
| MicroPoint 3.1 |
Certified:
|
5.4, 5.5, 5.6, and 5.7 |
| Receiver extension 3.2.0 |
Certified:
Supported by design:
|
5.10, 5.11 and 5.12 |
| Receiver extension 3.1.1 |
Certified:
Supported by design:
|
5.8, 5.9, 5.10 and 5.11 |
| Receiver extension 3.1 |
Certified:
Supported by design:
|
5.8 and 5.9 |
| Restricted Security Area (RSA) Surveillance 5.0 | For a list of supported systems and devices, see Tracking System Compatibility for Restricted Security Area Surveillance . | 5.8, 5.9, 5.10, 5.11 and 5.12 NOTE: Some tracking systems require Inter-System Gateway 1.1.
|
| Restricted Security Area (RSA) Surveillance 4.3 | For a list of supported systems and devices, see Tracking System Compatibility for Restricted Security Area Surveillance . | 5.8, 5.9, 5.10, 5.11 and 5.12 NOTE: Some tracking systems require Inter-System Gateway 1.1.
|
| Restricted Security Area (RSA) Surveillance 4.2 | For a list of supported systems and devices, see Tracking System Compatibility for Restricted Security Area Surveillance . | 5.8, 5.9, 5.10, 5.11 and 5.12 NOTE: Some tracking systems require Inter-System Gateway 1.1.
|
| Restricted Security Area (RSA) Surveillance 4.1 | For a list of supported systems and devices, see Tracking System Compatibility for Restricted Security Area Surveillance . | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| Restricted Security Area (RSA) Surveillance 4.0 | For a list of supported systems and devices, see Tracking System Compatibility for Restricted Security Area Surveillance . | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| Satel intrusion panel extension 5.0.0 for Genetec Intrusion Protocol |
Certified:
|
5.10 and 5.11 |
|
Synergis IX extension 3.2.0
NOTE: Only
available in Australia and New Zealand.
|
Not applicable | 5.8, 5.9, 5.10, 5.11 and 5.12 NOTE: Synergis IX is installed with Security
Center.
|
|
Synergis IX extension 3.1.1
NOTE: Only
available in Australia and New Zealand.
|
Not applicable | 5.8, 5.9, 5.10 and 5.11 NOTE: Synergis IX is installed with Security Center.
|
|
Synergis™ IX extension 3.1
NOTE: Only available
in Australia and New Zealand.
|
Not applicable | 5.8, 5.9 and 5.10 NOTE: Synergis IX is installed with Security
Center.
|
| Telenot intrusion panel extension 5.0.0 for Genetec Intrusion Protocol |
Certified:
|
5.10 and 5.11 |
| UTC Advisor Master and Advanced extension 3.2.0 | See the UTC Advisor Master and Advanced Intrusion Panel Extension Guide for supported devices and firmware versions. | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| UTC Advisor Master and Advanced extension 3.1 | See the UTC Advisor Master and Advanced Intrusion Panel Extension Guide for supported devices and firmware versions. | 5.8, 5.9, 5.10 and 5.11 |
| UTC Advisor Master and Advanced extension 3.0 | See the UTC Advisor Master and Advanced Intrusion Panel Extension Guide for supported devices and firmware versions. | 5.8, 5.9 and 5.10 |
| Vanderbilt SPC extension 3.3.0 |
Certified: Firmware version 3.6.6 Supported by design: Firmware version 3.8.5 |
5.8, 5.9, 5.10 and 5.11 |
| Vanderbilt SPC extension 3.2 |
Certified: Firmware version 3.6.6 Supported by design: Firmware version 3.8.5 |
5.8, 5.9, 5.10 and 5.11 |
| Vanderbilt SPC extension 3.1 |
Certified: Firmware version 3.6.6 Supported by design: Firmware version 3.8.5 |
5.8, 5.9 and 5.10 |
IoT
The following industrial internet of things (IIoT) plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Industrial IoT 5.2.0.0 |
Certified:
|
5.10, 5.11 and 5.12 |
| Industrial IoT 5.1.0.0 |
Certified:
|
5.10, 5.11 and 5.12 |
| Industrial IoT 5.0.3.0 |
Certified:
|
5.9, 5.10 and 5.11 |
| Industrial IoT 5.0.2.0 |
Certified:
|
5.9, 5.10 and 5.11 |
| Industrial IoT 5.0.1.1 |
Certified:
|
5.9, 5.10 and 5.11 |
| Industrial Protocol Interface 3.2.0.0 |
|
5.8, 5.9, 5.10 and 5.11 |
| Industrial Protocol Interface 3.1.0.0 |
|
5.8, 5.9, 5.10 and 5.11 |
| Industrial Protocol Interface 3.0.0.0 |
|
5.8, 5.9 and 5.10 |
| OPC Server 4.0 | OPC UA clients | 5.8, 5.9, 5.10 and 5.11 |
Key and asset management
The following key and asset management plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| deister proxSafe 3.2.1 | Certified: deister proxSafe Commander 4.8 and 4.11 | 5.9, 5.10, 5.11 and 5.12 |
| deister proxSafe 3.2.0 | Certified: deister proxSafe Commander 4.8 and 4.11 | 5.9, 5.10 and 5.11 |
| deister proxSafe 3.1 | Certified: deister proxSafe Commander 4.5 and 4.6 | 5.8, 5.9 and 5.10 |
| Key Systems Security Asset Manager 3.0.0 | Certified: Firmware 20201117a and 20210305a | 5.9, 5.10, 5.11 and 5.12 |
| Morse Watchmans KeyWatcher Touch 3.0.1 | Certified: KeyWatcher Server version 1.8.1, 1.8.2, and 2.1 | 5.8, 5.9, 5.10, 5.11 and 5.12 |
| Morse Watchmans KeyWatcher Touch 3.0 | Certified: KeyWatcher Server version 1.8.1, 1.8.2, and 2.1 | 5.8, 5.9, 5.10 and 5.11 |
| Traka Asset Management 3.4.0 | Certified: Traka Integration Engine Suite 2.12.2 & 2.22.0 | 5.10.4, 5.11 and 5.12 |
| Traka Asset Management 3.3.0 | Certified: Traka Integration Engine Suite 2.12.2 | 5.10.4 and 5.11 |
| Traka Asset Management 3.2.1 | Certified: Traka Integration Engine Suite 2.12.2 and 2.17.03 | 5.8, 5.9, 5.10 and 5.11 |
| Traka Asset Management 3.2 | Certified: Traka Integration Engine Suite 2.12.2 | 5.8, 5.9, and 5.10 |
| Traka Asset Management 3.1 |
Certified:
|
5.8, 5.9, and 5.10 |
Maintenance and health monitoring
The following maintenance and health monitoring plugin is compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Streamvault™ Maintenance 1.1 | Required: iDRAC9 6.00 or later | 5.9, 5.10, 5.11 and 5.12 |
Parking management
The following parking management plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Flexreader™ 6.1 | Not applicable | 5.8.1.14 |
| Flowbird GO 1.0 | Flowbird GO API v1 | 5.9.2.1 |
| Free-Flow Multi-tenant 9.5.0 | Not applicable | 5.11.3.7 NOTE: Requires Pay-by-Plate Sync 5.5
|
| Free-Flow 9.3.0 | Not applicable | 5.10.4.0 NOTE: Requires Pay-by-Plate Sync 5.5
|
| Free-Flow 9.2.0 | Not applicable | 5.9.2.0 NOTE: Requires Pay-by-Plate Sync 5.3
|
| Free-Flow 9.1.0 | Not applicable | 5.9.2.0 NOTE: Requires Pay-by-Plate Sync 5.3
|
| Free-Flow 9.0 | Not applicable | 5.8.1.1 NOTE: Requires Pay-by-Plate Sync 5.1
|
| Free-Flow Credential Report 1.0 | Not applicable | 5.8.1.0 |
| Free-Flow Dashboard 8.0 | Not applicable | 5.8 |
| Free-Flow Dashboard 7.0 | Not applicable | 5.6 SR2 and 5.7 |
| Free-Flow Data Exporter 2.1 | Not applicable | 5.10.0.0 |
| Hotlist and Permit Updater 3.0 | Not applicable | 5.11.3.0 |
| HUB MLPI Integration 1.0 | Not applicable | 5.7 SR6 CU3 |
| Pay-by-Plate Sync 5.7 | Multiple parking providers. See release notes. | 5.9.2.0 |
| Pay-by-Plate Sync 5.6 | Multiple parking providers. See release notes. | 5.9.2.0 |
| Pay-by-Plate Sync 5.5 | Multiple parking providers. See release notes. | 5.9.2.0 |
| Pay-by-Plate Sync 5.4 | Multiple parking providers. See release notes. | 5.9.2.0 |
| Pay-by-Plate Sync 5.3 | Multiple parking providers. See release notes. | 5.9.2.0 |
| Pay-by-Plate Sync 5.2 | Multiple parking providers. See release notes. | 5.8 |
| Pay-by-Plate Sync 5.1 | Multiple parking providers. See release notes. | 5.8 |
| Pay-by-Plate Sync 5.0 | Multiple parking providers. See release notes. | 5.8 |
| Pay-by-Plate Sync 4.4 | Multiple parking providers. See release notes. | 5.5, 5.6 SR1, and 5.7 |
| Pay-by-Plate Sync 4.3 | Multiple parking providers. See release notes. | 5.4, 5.5, 5.6 SR1, and 5.7 |
| Plate Pairing 1.0 | Not applicable | 5.10.4.0 |
| Post-Payment 1.0 | Flowbird StreetSmart 1.0 Q2C FPS Server 1.0 |
5.9.4.0 |
| SKIDATA PlateTech 1.0 | Not applicable | Not applicable |
| T2 PARCS 1.0 | Not applicable | Not applicable |
Perimeter protection
The following perimeter protection plugin is compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Southwest Microwave RPM II 3.0 | Certified: Remote Polling Module II (RPM II) for integrating INTREPID™ Series II sensors and auxiliary devices | 5.8, 5.9, 5.10, 5..11 and 5.12 |
Traffic management
The following traffic management plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Digital Signage Management 2.3 |
Certified:
|
5.8, 5.9, and 5.10 |
| Dynamic Message Signs (DMS) 2.2Renamed to Security Center Digital Signage Management in next release) | Certified: NTCIP 1203 V03 compliant signs using SNMP V1 or V2 | 5.7 SR3 |
| Fleet Monitoring 5.10.1.0 |
|
5.10 and 5.11 NOTE: Requires Vehicle
Monitoring 5.10.0.0 or later.
|
| Fleet Monitoring 2.3.32.0 |
|
5.8, 5.9, 5.10, 5.11 NOTE: Some features require Vehicle Monitoring
2.3.18.0.
|
| Fleet Monitoring 2.2 |
|
5.7 SR6 |
| Automatic Vehicle Locator (AVL) 2.2 (Renamed to Security Center Fleet Monitoring in next release) | N/A | 5.7 SR6 |
| GPS 2.2 (Documented in Automatic Vehicle Locator (AVL) 2.2) |
|
5.7 SR6 |
| Kashef Third-Party Matcher 1.0 | Kashef Secured Gate 3.0 | 5.8, 5.9, and 5.10 |
| Red Light Violation Detection 2.0 | Not applicable | 5.8 NOTE: RequiresSharpOS 12.7 or later
|
| Stakeout - ALPR Frequency Monitor 1.0 | Not applicable | 5.7 SR5 |
| Transportation Sensor Management 2.3 |
|
5.8, 5.9, 5.10, and 5.11 |
| Transportation Sensor Suite (TSS) 2.2 (Renamed to Security Center Transportation Sensor Management in next release) |
|
5.7 SR3 |
| Travel Times 12.4 | Genetec Travel Times Engine | 5.8 |
| Third-Party ALPR 5.10.2.0 |
|
5.10 and later NOTE: Some features require adequate versions of Fleet
Monitoring and Third-Party ALPR.
|
| Vehicle Monitoring 2.3.18.0 |
|
5.8, 5.9, 5.10, 5.11 NOTE: Some features require Fleet Monitoring
2.3.21.1.
|
| Vehicle Monitoring 5.10.0.0 |
|
5.10, 5.11 NOTE: Some features require Fleet
Monitoring 5.10.0.0.
|
Transaction monitoring
The following transaction monitoring plugins are compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Diebold ATM Integration 3.0 (Plugin guide coming soon) |
Certified:
|
5.8, 5.9 and 5.10 |
| Transaction Finder 3.2.0.0 |
Certified:
Transaction Finder 3.2.0.0 can connect to custom parsers using the Gateway API that is deployed as part of the plugin. Parsers are provided in an installation package that is separate from the plugin. For more information, please consult your Genetec Inc. representative. |
5.10.1.0 and 5.11 |
| Transaction Finder 3.1 |
Certified:
The parsers listed above are included in the plugin installation package. Other parsers are available. Please consult your Genetec Inc. representative for details. |
5.8.1, 5.9.1 and 5.10 |
Video analytics
The following video analytics plugin is compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Security Center Incident Snapshots Generator 3.0.0.0 | Not applicable | 5.10 and 5.11 |
Workflow management
The following workflow management plugin is compatible with the Security Center versions and third-party products listed in the table.
| Plugin | Third-party version | Certified Security Center version |
|---|---|---|
| Dynamic Log Book 4.1.0 | Not applicable | 5.8, 5.9, 5.10 and 5.11 |
| Dynamic Log Book 4.0 | Not applicable | 5.8, 5.9, and 5.10 |