Supported HID VertX sub-panels - Security Center 5.10

Security Center Administrator Guide 5.10

Applies to
Security Center 5.10
Last updated
2023-06-12
Content type
Guides > Administrator guides
Language
English
Product
Security Center
Version
5.10

The HID VertX sub-panels, also known as interface panels, can be used with either HID VertX V1000 network controllers or Synergis™ appliances.

For more information, see the HID datasheets on the Genetec™ Resource center.

VertX V100

Characteristics Specifications
Power supply 9 – 18 VDC
Average operating current at 12 VDC (0 readers) 60 mA
Average operating current at 12 VDC (2 readers) 600 mA
Operating temperature range 32 ° – 122 ° F ( 0 ° – 50 ° C)
Humidity 5% to 95% non-condensing

VertX V200

Characteristics Specifications
Power supply 9 – 18 VDC
Average operating current at 12 VDC 50 mA
Resistors for input supervision 1 – 10 kohm
Operating temperature range 32 ° – 122 ° F ( 0 ° – 50 ° C)
Humidity 5% to 95% non-condensing

VertX V300

Characteristics Specifications
Power supply 9 – 18 VDC
Average operating current at 12 VDC 60 mA
Relay rating 2 A @ 30 VDC (maximum load)
Operating temperature range 32 ° – 122 ° F ( 0 ° – 50 ° C)
Humidity 5% to 95% non-condensing

Cable specifications

When attaching the interface modules to their controllers, make sure you do not exceed the recommended cable lengths.

Cable type Maximum length Description
Wiegand 500 ft. (152 m) to reader ALPHA 1299C, 22AWG, 9-conductor, stranded, overall shield. Fewer conductors needed if all control lines are not used.
RS-485 4000 ft. (1220 m) to controller Belden 3105A, 22AWG twisted pair, shielded 100 Ω cable, or equivalent.
Ethernet 328 ft. (100 m) Cat5, Cat5E and Cat6.
Hi-O CAN bus 100 ft. (30 m) 22AWG gauge. Maximum between drops 30 ft. (10 m).