Configuring Security Center to open live video quickly - Security Center 5.8

Security Center Administrator Guide 5.8

series
Security Center 5.8
revised_modified
2020-08-17

You can minimize the time it takes for a camera to open and display live video in the Security Desk Monitoring task by adjusting settings in Config Tool and Security Desk.

What you should know

Several factors affect the time it takes to display live video from a camera in Security Desk:
  • Video compression format: MJPEG video streams usually display quicker than H.264 video streams.
  • Image quality: a camera usually displays live video quicker with video image quality of 70% than with video image quality of 100% or below 60%.
  • Key frame interval: setting a low Key frame interval for the camera in Config Tool might produce better results.

Procedure

  1. From the Config Tool home page, open the Video task.
  2. Select the camera to configure and click the Video tab.
  3. In the Stream usage section, turn on Live and Recording for the selected stream.
  4. In the Network settings section, select Multicast as the Connection type.
  5. Click Apply.
  6. Click the Recording tab and select Continuous from the Recording modes drop-down list.
  7. Click Apply.
  8. From the Security Desk home page, click Options > Video.
  9. Scroll down to the Video cache section and turn off Live video caching.
  10. Under Advanced settings, set the Jitter buffer delay to 0 ms.
  11. Restart Security Desk.