Navigation - Equipment tab - Monitor in Genetec Patroller™ Config Tool - Genetec Patroller™ 6.6

Genetec Patroller™ Administrator Guide 6.6

Applies to
Genetec Patroller™ 6.6
Last updated
2022-04-22
Content type
Guides > Administrator guides
Language
English
Product
Genetec Patroller™
Version
6.6

Monitor AutoVu navigation hardware status.

GNSS navigation information
The first table in the monitoring page shows the following information:
  • Signal quality
  • Longitude, latitude, and altitude
  • Odometry, heading, and speed
  • Number of satellites
  • Time

The navigation information table scrolls down automatically to show the most recent data first. Use the scroll bar to go back and stop the automatic scrolling. To reactivate it, scroll completely down to display the most recent data.

Malfunctions
The second table in the monitoring page shows different possible problems with the navigation hardware: high temperature, double information from tags, network connection lost with the navigation module, and others. It is hidden if no malfunction is detected.
Odometry tags status
The third table in the monitoring window shows the odometry tire tags' statistics, and their configuration status. This table also shows the position of the tag that is next to the reader (last read). This information is useful if you need to locate a faulty tire tag.
Vehicle status
Three status are available about the vehicle on which the navigation is installed:
Ignition
Indicates the engine ignition status: ON or OFF.
Vehicle
Indicates the vehicle mobility: still or moving
Direction
Indicates the direction the vehicle is moving: backward or forward.