[KBA-00126] Disabling inputs on Verint multichannel encoders in Omnicast™
This article explains how to disable inputs on Verint encoders in Omnicast™.
Not all Verint multichannel encoders can have ports disabled. The best way to verify if you can disable ports on your unit is to check on the unit itself.
- In Windows, telnet into the unit by going to , where x is the IP address of the encoder.
- Click .
- Go to the port you want to disable (for example, Video Encoder #2).
- To disable the port, type 0.
- Return to the main menu.
- Click Save.
- Reboot the unit.