Connecting the camera’s CAT5e cable to the LPR Processing Unit - SharpX X1S, X2S, X1S-CN, X2S-CN, XSU

AutoVu Hardware Guide for SharpX Mobile Installation

Applies to
SharpX X1S, X2S, X1S-CN, X2S-CN, XSU
Last updated
2018-10-05
Content type
Guides
Guides > Installation guides
Language
English (United States)
Product
SharpX

When connecting SharpX cameras, you need to connect the CAT5e cable to the LPR Processing Unit. The CAT5e wires are contained in the all-in-one cable.

Procedure

  1. Strip the CAT5e cable you exposed when you connected the camera cable to the LPR Processing Unit.
    Make sure not to nick or cut the insulation of the interior wires.
  2. Terminate the CAT5e connection using the T568B conductor arrangement.
    IMPORTANT: The SharpX CAT5e connection requires the T568B CAT5e wire pattern.
  3. Connect the CAT5e cable to the Data Link port on the LPR Processing Unit.