Shortening CAT5e cables using the EZ-RJPRO™ HD crimp tool - SharpX X1S, X2S, X1S-CN, X2S-CN, XSU

AutoVu Hardware Guide for SharpX Mobile Installation

Applies to
SharpX X1S, X2S, X1S-CN, X2S-CN, XSU
Last updated
2018-10-05
Content type
Guides
Guides > Installation guides
Language
English (United States)
Product
SharpX

Depending on the installation type, you may need to terminate the Sharp and SharpX CAT5e cables or shorten an existing terminated cable with the EZ-RJPRO™ HD crimp tool.

What you should know

  • The Sharp “all-in-one” cable includes 1x CAT5e, 4x 20AWG for power, micro-coax for video, 1x 24AWG drain wire.
  • The SharpX “all-in-one” cable includes 1x CAT5e, 2x 20AWG for power, 2x 24AWG for video, 1x 24AWG drain wire.
  • You cannot reuse the same RJ45 connector you cut off the Sharp cable. New RJ45 connectors are included with the hardware in every AutoVu™ system.

Procedure

  1. If needed, expose the wires in the all-in-one cable.
  2. Create the CAT5e connection for the exposed CAT5e cable using the EZ-RJPRO™ HD.