Selecting permits in Genetec Patroller™ - Genetec Patroller™ 6.4

AutoVu Patroller Standalone User Guide 6.4

Applies to
Genetec Patroller™ 6.4
Last updated
2017-09-28
Content type
Guides
Guides > User guides
Language
English (United States)
Product
Genetec Patroller™
Version
6.4

The Permit window allows you to select the permit you want to enforce.

Before you begin

What you should know

You may have more than one permit list to choose from, so choose the permit list that applies to your patrol area.
NOTE: Auto-selection of a permit is only supported in Security Center 5.3 SR1 and later. The Auto-Selection tab will be disabled if you are using an older version of Security Center.

Procedure

  1. In the main Genetec Patroller™ window, tap Permits.
    If you’re using an overtime rule and permit list together, make sure to choose the ones that correspond to each other.

  2. Select a permit from the list.
  3. Click OK.
    The color of the Permits icon in the Genetec Patroller™ main window will change to reflect the color of the permit chosen. Click Cancel at any time to return to the main window and None to clear the currently selected permit list.