Running and installing the wheel-imaging camera cable - SharpZ3 | SharpOS 13.0

To connect the wheel-imaging cameras to the base unit, you must run the camera cables from the SharpZ3 base unit to the wheel-imaging camera location.

(Side-mount) To run the cable:

1. Install the provided cable gland (grommet) in the camera cable hole.
2. Install additional cable glands (not provided) in the hole drilled in the trunk and any other camera cable holes.
3. Run the camera cable to the SharpZ3 base unit location.

(Trunk-mount) To run the cable:

1. Install the provided cable gland (grommet) in the camera cable hole.
2. Run the camera cable to the SharpZ3 base unit location.
3. Secure the camera cable to the trunk lid and trunk hinge using tie wraps.