SharpOS 13.0 Sharp Portal - Maintenance page - SharpZ3 | SharpOS 13.0

AutoVu SharpZ3 Deployment Guide 13.0

Applies to
SharpZ3 | SharpOS 13.0
Last updated
Content type
Guides > Deployment guides

This section lists the settings found in the Maintenance page of the Sharp Portal. Use the Maintenance page to update software or reboot the unit.

To navigate to the Maintenance page, click Configuration > Maintenance.

Update the SharpOS software or the platform OS with latest security updates.
Free up space
Space is freed up by deleting log files, untransmitted reads, and clearing the update cache.
Reboot unit
Click to restart the SharpZ3.
NOTE: If you are rebooting a SharpZ3 system that includes a four-camera ALPR module, each group of two cameras is configured on a separate Sharp Portal. Rebooting the unit only reboots the stack associated with the current portal. To reboot the entire system, you must power cycle the base unit.
Blink LED
Click to blink the LED on the SharpZ3 for about a minute. This is useful when you have multiple units and you want to physically identify the one you are configuring.