Connecting the AutoVu™ Mobility Kit cables - SharpZ3 13.0 - 13.3

AutoVu™ Mobility Kit - SharpZ3 Hardware Installation Guide
Product
SharpZ3
Content type
Guides > Installation guides
Version
13.3
13.2
13.1
13.0
ft:locale
en-US
Last updated
2021-02-02

After running the power, network, and camera cables, you must connect them to the panel on the side of the AutoVu™ Mobility Kit.

Before you begin

Run the cables to the AutoVu™ Mobility Kit.

What you should know

The AutoVu™ Mobility Kit uses “bayonet-lock” connectors for the power, camera and network connections.

Procedure

  1. Align the connector with the appropriate port of the AutoVu™ Mobility Kit connection panel.
  2. Insert the connector into the port.
  3. Turn the connector 1/4 turn clockwise until it locks into place.
    NOTE: The power cable connector includes a spring latch that must be released when disconnecting the cable.
Browse