The connection ports for the power, camera, and network cables are connected to the panel on the side of the AutoVu™ Mobility Kit. Before beginning the installation, it is recommended that you familiarize yourself with the AutoVu™ Mobility Kit controls and inputs.
The SharpZ3 base unit is located under the cable storage compartment, however, it is normally not necessary to access the base unit directly. LED feedback is visible through the opening in the cable storage compartment.
| A | Power button | Powers up the AutoVu™ Mobility Kit.
NOTE: The way the Power button functions
depends on how power is supplied to the AutoVu™ Mobility Kit. For more information,
see Powering up the AutoVu™ Mobility Kit.
|
| B | Power LED | Indicates that power is supplied to the ALPR Processing Unit. |
| C | Exhaust fan | Circulates air out of the case. Air intake vent located on opposite side of case. |
| D | LAN connector | Connects to network port on in-vehicle computer. |
| E | 12/24VDC power connector | Connects to cigarette lighter socket or hardwired. |
| F | Camera connectors | Connect to SharpZ3
cameras. NOTE: The kit is available with two or four
connectors.
|