SharpOS 13.6 Sharp Portal - Exposure page - SharpV | SharpOS 13.6

To navigate to the Exposure page, click Configuration > Cameras > Exposure.

The following information is displayed:

Select your camera

Select the camera to configure.

(Context camera only) Lighting type

Select a lighting type from the menu.

NOTE: Information on context cameras is not applicable to SharpV ITS cameras.

Lighting type

Select a lighting type from the menu:

Auto (Default)

Select this option to have the SharpV automatically adjust the lighting settings (white balance) according to the surroundings.

Fixed (Sun)

Select this option if advised by the customer support team.

Exposure

Choose from the following:

Default

Select this option to have the SharpV automatically adjust the exposure settings.

Fixed (indoor)

Select this option when constant lighting conditions are available. Use the sliders to adjust the Gain and Exposure time, until the overall brightness and clarity you want for the image is achieved.

Range (outdoor)

Select this option for variable lighting conditions outdoors. Use the sliders to adjust the Gain and Exposure time, until the overall brightness and clarity you want for the image is achieved.

Reflective and non-reflective

Select this option if the license plates in your region include a mix of reflective and non-reflective plates. Use the sliders to adjust the Night and Sunlight settings for reflective and non-reflective plates.

(Context camera only) Allow illuminator

Select this to enable the IR illuminator in low light conditions. If Exposure is set to Fixed (indoor), the IR illuminator is fixed to On or Off depending on Allow illuminator check box. If Exposure is set to Range (outdoor), the illuminator is automatically turned On or Off depending on light conditions. However, the IR illuminator can be completely turned off by clearing the Allow illuminator check box.

NOTE: Information on context cameras is not applicable to SharpV ITS cameras.