Configuring the SharpV FTP extension - SharpV | SharpOS 14.2

AutoVu™ SharpV Administrator Guide 14.2

Applies to
SharpV | SharpOS 14.2
Last updated
2023-11-01
Content type
Guides > Administrator guides
Language
English
Product
SharpV
Version
14.2

You can configure the SharpV to send ALPR data to an FTP server. ALPR data that is sent to an FTP server can then be integrated by third-party applications.

What you should know

You can only configure one extension for the SharpV camera.

Procedure

  1. Log on to the Sharp Portal.
  2. From the Configuration menu, select the Connectivity > Extension page.
  3. From the Active extension section, select FTP from the Extension type drop-down menu.
  4. Configure the following:
    Server
    Enter the FTP server name and location for the ALPR data. You’ll need the server name, port number (if different than the standard FTP server port 21), and the name of the folder. For example, ftp://<ServerName>:<PortNumber>/<FolderNameOnServer>/.
    Username
    Enter the username for the FTP server.
    Password
    Enter the password for the FTP server.
    Content Template
    ALPR data is sent in XML format, using the template shown. You can change certain elements if you choose.
    Export context images
    Export the context image (in JPEG format).
    Export ALPR images
    Export the plate image (in JPEG format).
    Retain data when the connection is lost
    If the check box is selected, plate read events are saved locally in the SharpV’s database if the connection with the FTP server is lost. The system tries to re-connect with the server every 30 seconds. Stored reads are pushed to the server when the connection is re-established. If the check box is cleared, the SharpV does not store reads locally if the connection with the FTP server is lost. You can see how many reads are stored on the SharpV in the Dashboard > Overview > Storage and usage section.
    NOTE: If there are any plate reads in the SharpV's database, clearing this check box and saving the configuration deletes the plate reads.
  5. Click Test connection to test the connection to the FTP server.
  6. Click Send sample to send a test plate to verify that the system can connect to the server using these settings.
  7. Click Save.