Specifications for the SharpV - SharpV | SharpOS 14.2

AutoVu™ SharpV Administrator Guide 14.2

Applies to
SharpV | SharpOS 14.2
Last updated
2023-11-01
Content type
Guides > Administrator guides
Language
English
Product
SharpV
Version
14.2

Refer to the technical, mechanical, and environmental specifications when planning and deploying a SharpV camera.

NOTE: For the most recent version of the SharpV specifications, refer to the SharpV datasheet.

Mechanical and environmental specifications

Hardware Specification
ALPR camera sensor 1920 x 1200 @ 30 fps; monochrome; global shutter
Capture range 3 m (9 ft) to 45 m (148 ft)*

* For details, contact your Genetec™ representative.

Dimensions Height: 63 mm (2.5 in)*

Width: 192 mm (7.6 in)

Length: 214 mm (8.5 in)

* 71 mm (2.8 in) high with sun shield for black version; 81 mm (3.2 in) high with front GPS antenna; 232 mm (9.1 in) high with back cellular antennas.

Weight 2.51 kg (5.53 lb)
Illuminator Pulsed LED illuminator for effective use in 0 lux (total darkness) environments 940nm, 850nm, 740nm and 590nm illumination wavelengths available
Context camera sensor 1920 x 1200 @ 30 fps; color; global shutter
Available colors Security white / black
Operating temperature -40°F to 149°F (-40°C to 65°C) ambient operating temperature

-40°F to 185°F (-40°C to 85°C) ambient storage temperature

On-board analytics

  • Character height
  • Confidence score
  • Plate tilt
  • Relative motion
  • State
  • Vehicle accessories
  • Vehicle color
  • Vehicle make
  • Vehicle orientation
  • Vehicle type
Power supply PoE++ (Power over Ethernet) 802.3bt Type 3: 27 W typical, 40 W max

24 V input option: 24 V dc +/-10%, 25 W typical consumption, 37 W max

Still image compression JPEG compression for ALPR and Context still images
Data interface LAN: 1 x 10/100/1000 Base-T Ethernet port

WWAN (select models and territories): 4G/LTE Category 4

Video streaming H.264 @ up to 30 fps; MJPEG @ up to 15 fps
External I/Os 2 inputs / 2 outputs (opto-isolated)
Mounting Pole mount and wall mount included

Satellite positioning accuracy

SharpV units that include the LTE option support GPS, Glonass, Beidou, Galileo, and QZSS constellations.

The following precision results are based on a 24-hour static test with unobstructed sky, SBAS reception, and signal reception from more than six satellites (> 6 SV).

Probability specification Definition Horizontal position accuracy
CEP (50%) Circular Error Probable 0.9 m
DRMS (63~68%) Distance of Root Mean Square 1.1 m
2DRMS (95~98%) Two times DRMS 2.2 m

Network cable specifications

Hardware Specification
Cable rating CAT5e or higher (special connector provided for IP67 rating)
Shielding Shielded or unshielded
Conductor gauge 24 AWG
Conductor arrangement Straight-through EIA-568A or EIA-568B
Cable diameter The RJ45 connector that is shipped with the system accepts CAT5e cable diameters from 4.8 mm (0.19 in) to 6.7 mm (0.26 in).

The bayonet shell supports cable diameters from 4.5 (0.18 in) to 8 mm (0.31 in).

Cable length Maximum 100 m (330 ft)
Environmental The network cable must be waterproof and UV-resistant, with a temperature rating appropriate for your climate.
PoE++ standard PoE++ (Power over Ethernet) 802.3bt Type 3 40 W
NOTE:
  • Not all hardware that is labeled "PoE++" meets the IEEE 802.3bt standard that is required for use with the SharpV.
  • Ensure that the total power consumption of all hardware connected to the PoE++ source does not exceed the power budget of the PoE++ source. Each SharpV camera must be supplied with 40 W.
  • If the SharpV is supplied with PoE+ or PoE power, it might still operate with limited functionality. For more information, see Troubleshooting: SharpV cannot read plates but Sharp Portal is accessible.

Input / output specifications

Hardware Specification
Inputs
Number of inputs 2
Input rating 0 V dc - 30 V dc
Guaranteed ON state threshold 5.75 V
Guaranteed OFF state threshold 4.80 V
Overvoltage protection Included
Reverse voltage protection Included
Input type Opto-isolated, DC polarized
Outputs
Number of outputs 2
Output rating 30 V / 100 mA
On-state voltage Von = <1.0 V @ 2 mA

Von = <2.5 V @ 100 mA

Overcurrent (overload) protection Included
Reverse voltage protection Included
Output type Opto-isolated, dry

Input / output cable specifications

Hardware Specification
Cable diameter The I/O cable assembly is compatible with cable diameters from 4 mm (0.16 in) to 8 mm (0.31 in).
NOTE: Two different cable seals are included with the I/O cable assembly. Refer to the manufacturer's instructions to determine which seal to install for the diameter of cable you are using.
Wire gauge The I/O cable assembly can support a maximum wire gauge of 20 AWG. The cable's voltage rating must be suitable for the SharpV I/O specifications and must conform to electrical codes in your region.
Weather rating The cable must be waterproof, UV resistant, and must be rated for outdoor installation in accordance with your region.

SharpV mounting specifications

Hardware Specification
Mounting bolts Type M6 x 1 mm
Mounting hole distance 70 mm (2.75 in)
Mounting hole depth 9.5 mm (0.37 in)

Certifications and compliance

Compliance Specification
Safety IEC/EN 62471. Photobiological safety of lamps and lamp systems. Exempt Group.
WARNING: Depending on the LED illuminator wavelength option selected for the camera hardware, the light emitted from the device might be visible or invisible to the eye. To limit the danger to your eyes caused by infrared light, stay at least 20 cm (8 in) from the front of the camera. Ensure that the camera installation location prevents or discourages anyone from looking at the face of the camera from within this distance.
Electromagnetic immunity and emissions FCC | ICES-003 Issue 4 | CISPR32/EN55032* | CISPR35/EN55035*
EMC Directive (CE marking) 2014/30/EU*
Vibration and shock* IEC 60068-2-64: 5~100Hz | 0.5 g rms

IEC 60068-2-27: 10g | 16ms half-sine; 3 shocks on X, Y, and +Z axes, 1000 on -Z axis

MIL-STD-810H §514.8 Category 4 – Composite two-wheeled trailer

Impact* IEC 62262:IK09
Sealing (water and dust protection)* IEC 60529: IP66/IP67

* Applies only to SharpV G3 unit part numbers with the 000 communication option.

SharpV part numbers

NOTE: For information on part numbers for SharpV G1 and G2 hardware revisions, see the AutoVu™ SharpV Installation Guide.
Characters Description
A AutoVu™ SharpV
B
Color
W (white) or B (black)
C Range:
SharpV G3

S (standard) 3 m (9 ft) to 45 m (148 ft)*

* Under ideal conditions. For details, contact your Genetec representative.

SharpV G1 and G2

S (standard) 2.75 m (9 ft) to 18.25 m (60 ft)

L (long range) 18.25 m (60 ft) to 35 m (115 ft)

D Illumination: LED illumination in nanometers
E Camera option:
LC
LPR and context
L
SharpV G1 units with LPR only
F SharpV hardware version: Displays the SharpV hardware version for G3 and G2 units only.
G Communication option: Displays the SharpV communication options for G3 units only.
First digit
Future use
Second digit
M: Cellular, GPS, and Ethernet
0: Ethernet only
Third digit
1: North America
0: No specific region