About port forwarding for SharpV cameras using the LPM protocol - SharpV | SharpOS 13.6

AutoVu™ SharpV Deployment Guide 13.6

Product
SharpOS
SharpV
Content type
Guides > User guides
Version
13.6
Language
English
Last updated
2022-07-19

For SharpV cameras that use the LPM protocol to connect to Security Center, if either the SharpV or the ALPR Manager role is behind a Network address translation (NAT) device, additional configuration is required.

IMPORTANT: Consider the following when designing your system:
  • If the SharpV camera or the ALPR Manager role are behind a NAT, it is not possible to configure a failover server.
  • If you have a multi-server system where the Directory and the ALPR Manager roles are installed on different machines, it is not possible to configure NAT port forwarding for the ALPR Manager role.

The SharpV is behind a NAT

In this case, you must configure port forwarding to forward the port of the NAT to the IP address and port of the ALPR Manager. For example, if port 123 is available on the NAT, configure port forwarding to point to port 443 on the SharpV.

image/svg+xml NAT 123 443 Private network Public network

  • When adding the SharpV to the ALPR Manager using the Create a unit wizard, enter the IP address and port of the NAT.

    image/svg+xml NAT NAT

The ALPR Manager role is behind a NAT

In this case, you must configure the ALPR Manager listening port to match the inbound port that is configured on the NAT. For example, if port 8711 is available on the NAT and the firewall rules have been configured accordingly, configure port forwarding to point to port 8711 on the ALPR Manager.

image/svg+xml NAT Public network Private network 8711 8711

  • In the Server Admin Public address field, enter the hostname or IP address.

    image/svg+xml NAT scc-000224-01a.canad

  • When adding the SharpV to the ALPR Manager using the Create a unit wizard, enter the IP address and port of the SharpV.

  • Update the port that the ALPR Manager will be listening on. In this example where the NAT is configured to use port 8711, you would change the LPM protocol Listening port from the default port (10001) to port 8711.

    image/svg+xml NAT NAT