Before installing a SharpV system, it is recommended that you familiarize yourself with the hardware components used in a typical installation.
| Component | What you should know | |
|---|---|---|
| A | SharpV: Input / output connection | The SharpV includes two inputs and two outputs (I/O). You can configure the SharpV to use an input signal to trigger a license plate read. For more information, see SharpV input/output cable termination. |
| B | SharpV: Network cable connection | The SharpV connects to the network, using a standard CAT5e network cable (not included). For more information, see Network cable requirements for SharpV cameras. |
| C | Mounting bracket | A Videotec WBJA (white) or WBJF (black) mounting bracket is included with the SharpV unit. You can also mount the unit using adapters for third-party mounting hardware or using your own custom solution. For a list of compatible mounting brackets, see SharpV mounting hardware. |
| D | Input / output control | Using the SharpV's inputs and outputs, you can configure Security Center to control an entry point based on a valid license plate read. For more information, see SharpV input/output cable termination. |
| E | PoE+ power | Power is supplied to the SharpV through the network cable, using PoE+. For
more information, see Network cable requirements for SharpV cameras. NOTE: PoE+
provides a maximum of 25.5 W of power, compared to the 13.0
W provided by standard PoE.
|