SharpV mounting hardware - SharpV | SharpOS 13.6

AutoVu™ SharpV Deployment Guide 13.6

Applies to
SharpV | SharpOS 13.6
Last updated
2022-07-19
Content type
Guides > User guides
Language
English
Product
SharpOS
SharpV
Version
13.6

A Videotec WBJA (white) or WBJF (black) mounting bracket is included with the SharpV unit. You can also mount the unit using adapters for third-party mounting hardware or using your own custom solution.

If the provided wall mount bracket is not suitable for the installation, you have the following mounting options:
  • Use one of the provided third-party adapters listed in the Included mounting hardware section.
  • Purchase one of the Compatible Videotec mounts from a Videotec reseller.
  • Create a custom solution using the T-slots on the sides of the camera.

Included mounting hardware

When you purchase a SharpV camera unit, mounting hardware is included that is suitable for most wall-mount and pole-mount installations.
Tip: The rubber plugs that cover the SharpV focus and zoom adjustment screws can be lost during the calibration procedure. Always have extra plugs available (AU-H-SHPVCAPS).
Hardware Description Part number

Wall mount bracket

  • Wall mount bracket with pan-tilt joint
  • Available in black (WBJF) or white (WBJA)

Videotec: WBJF/WBJA

AU-H-V-ARM-BLACK

AU-H-V-ARM-WHITE

Pole adapter

  • Adapter for pole mounting of the provided wall mount bracket
  • Supports pole diameters from 3 in. (7.6 cm) to 8 in. (20.3 cm). Metal straps included.

AU-H-V-POLEADPT-[BLACK]

AU-H-V-POLEADPT-[WHITE]

Pelco adapter

  • SharpV Pelco mounting bolt pattern adapter kit

AU-H-V-PELCOADPT-[BLACK]

AU-H-V-PELCOADPT-[WHITE]

Accessory kit

  • I/O connection plug
  • RJ45 bayonet plug
  • Screwdriver for focus and zoom adjustment
  • 2 spare rubber plugs for focus and zoom adjustment (one black and one white)
AU-H-V-ACCYKIT

Compatible Videotec mounts

The following Videotec mounts are compatible with the SharpV mounting hole pattern. For a full list of compatible Videotec mounting brackets, see the Videotec brackets datasheet.

IMPORTANT: If you purchase a Videotec mounting bracket, ensure that the mounting plate of the bracket you have selected has the same thickness as the provided bracket (WBJA/WBJF). If required, add washers to shim accordingly, so that you do not exceed the maximum bolt depth of 9.5 mm (⅜ in.).
NOTE: All Videotec mount are white unless otherwise specified. For color options, contact a Videotec reseller.
Camera mount Description Part number
WBJA Wall mount bracket with pan-tilt joint (white) AU-H-V-ARM-WHITE
WBJF Wall mount bracket with pan-tilt joint (black) AU-H-V-ARM-BLACK
WBMA Wall mount bracket with pan-tilt joint (short)  
WFWCA Parapet mount with pan-tilt joint  
WCM3A Ceiling bracket with pan-tilt joint (square tubing)  
WCM5A Ceiling mount with pan-tilt joint (round tubing)  
WCPA Reinforcing support plate for poor consistency walls (BHWGC)  
WCWA Corner adapter for WBJA, WBMA  
WSFPA Pole mount adapter for pole diameters 65 - 110 mm (2.6 - 4.3 in.). Can mount WBJA or WBMA.  
DBHWGC Pole mount adapter for pole diameters 210 - 225 mm (8.3 - 8.6 in.). Requires WCPA to mount WBJA or WBMA.  

Videotec customer support

For information about compatible Videotec mounts, contact your Videotec representative:

Americas:
Tel: +1 518-825-0020
Email: info.usa@videotec.com
APAC
Tel: 852 2333 0601
Email: info.hk@videotec.com
EMEA
Tel: 39 0445 697411
Email: info@videotec.com
France and French-speaking countries in Africa
Tel: 33 1 60491816
Email: info.fr@videotec.com

For a full list of contacts, see http://www.videotec.com/en/page_556.html.