Refer to the technical, mechanical, and environmental specifications when planning and deploying a SharpV camera.
Mechanical and environmental specifications
| Hardware | Specification |
|---|---|
| ALPR camera sensor | 1280 x 960 progressive scan 30 fps (60 Hz) or 25 fps (50 Hz), monochrome |
| Context camera sensor | 1280 x 960 progressive scan 30 fps (60 Hz) or 25
fps (50 Hz), color (available on Standard model only) NOTE: Information
on context cameras is not applicable to SharpV ITS cameras.
|
| Capture range |
|
| Dimensions (HxWxD) | 63 x 192 x 214 mm (2.5 × 7.6 × 8.5
in.) Height including sunshield for black version: 69 mm (2.7 in.) |
| Weight | 2.29 kg (5.04 lb) |
| Illuminator | Pulsed LED illuminator for effective use in 0 lux (total darkness) environments. Different illumination wavelengths are available. |
| Available colors | Security white or black |
| Operating temperature |
|
| On-board analytics | Single-camera speed estimation, direction of travel, virtual loop, and state name (North America and Europe) |
| Power supply | PoE+ (Power-over-Ethernet; 802.3at Type 2 (25.5 W)) |
| Input rating | PoE+: 43 – 57V, 0.6 – 0.4A |
| Compression | MJPEG or H.264 video compression for ALPR and Context feeds; JPEG compression for ALPR and Context still images |
| External interface | 1 x 10/100/1000 Base-T Ethernet port |
| External I/O |
|
| Mounting | Pole mount and wall mount included. |
Network cable specifications
| Hardware | Specification |
|---|---|
| Cable rating | CAT5e or higher (special connector provided for IP67 rating) |
| Shielding | Shielded or unshielded |
| Conductor gauge | 24 AWG |
| Conductor arrangement | Straight-through EIA-568A or EIA-568B |
| Cable diameter | The RJ45 connector that is shipped with the system
accepts CAT5e cable diameters in the range 4.8 - 6.7 mm (0.19 - 0.26
in.). The bayonet shell supports cable diameters in the range 4 - 8 mm ( 0.16 - 0.31 in.). |
| Cable length | Maximum 100 m (330 ft) |
| Environmental | The network cable must be waterproof and UV-resistant, with a temperature rating appropriate for your climate. |
| PoE+ standard | Power-over-Ethernet; 802.3at Type 2 (25.5 W) NOTE:
|
Input / output specifications
| Hardware | Specification |
|---|---|
| Inputs | |
| Number of inputs | 2 |
| Input rating | 0 VDC - 30 VDC |
| Guaranteed ON state threshold | 5.75 V |
| Guaranteed OFF state threshold | 4.80 V |
| Overvoltage protection | Included |
| Reverse voltage protection | Included |
| Input type | Opto-isolated, DC polarized |
| Outputs | |
| Number of outputs | 2 |
| Output rating | 30 V / 100 mA |
| On-state voltage | Von = <1.0 V @ 2 mA Von = <2.5 V @ 100 mA |
| Overcurrent (overload) protection | Included |
| Reverse voltage protection | Included |
| Output type | Opto-isolated, dry |
Input / output cable specifications
| Hardware | Specification |
|---|---|
| Cable diameter | The I/O cable assembly is compatible with cable
diameters in the range 4 - 8 mm (0.16 - 0.31 in.). NOTE: Two different cable seals are included with the I/O cable assembly. Refer to
the manufacturer's instructions to determine which seal to install for the
diameter of cable you are using.
|
| Wire gauge | The I/O cable assembly can support a maximum wire gauge of 20 AWG. The cable's voltage rating must be suitable for the SharpV I/O specifications and must conform to electrical codes in your region. |
| Weather rating | The cable must be waterproof, UV resistant, and must be rated for outdoor installation in accordance with your region. |
SharpV mounting specifications
| Hardware | Specification |
|---|---|
| Mounting bolts | Type M6 x 1mm |
| Mounting hole distance | 70 mm (2 3/4 in.) |
| Mounting hole depth | 9.5 mm (3/8 in.) |
Certifications and compliance
| Compliance | Specification |
|---|---|
| Safety | IEC/EN 62471. Photobiological safety of lamps and lamp systems WARNING: Depending on the LED illuminator wavelength option selected for the
camera hardware, the light emitted from the device might be visible or invisible
to the eye. To limit the danger to your eyes caused by infrared light, stay at
least 20 cm (8 in.) from the front of the camera. Ensure that the camera
installation location prevents or discourages anyone from looking at the face of
the camera from within this distance.
|
| Electromagnetic immunity and emissions | FCC part 15 Subpart B | ICES-003 Issue 4 | CISPR32 / EN55032 | CISPR 24 / EN 55024 |
| EMC Directive (CE marking) | 2014/30/EU |
| Vibration and shock |
Random : IEC 60068-2-64; 5-100Hz; 0.5g; 3 axes; 1 hours/axis Sinusoidal, endurance : NEMA TS-2 Test 2.2.8.4; 30Hz, 3 axes; 1 hours/axis Shock resistance : IEC60068-2-27 / NEMA TS-2 Test 2.2.9; 10g; 3 axes, 3 shocks per direction per axis |
| Water resistance and sealing | IEC 60529 IPx6, IPx7 | IEC 60529 IP6x |
Part numbers
| Component | Signification |
|---|---|
| A | SharpV prefix |
| B | Color: W (white) or B (black) |
| C | Range:
|
| D | Illumination: LED illumination in nanometers |
| E | Camera option: LC (ALPR and context) or L (ITS - Intelligent Traffic Systems: ALPR only) |