Configuring SharpV network settings - SharpV | SharpOS 14.2

You can configure the SharpV to use Dynamic Host Configuration Protocol (DHCP) or a static IP address.

1. Log on to the Sharp Portal.
2. From the Configuration menu, select the Network > Ethernet page.
3. Select one of the following:

   Use DHCP

   This is the default mode for SharpV cameras. Select DHCP if you are connecting the Sharp to a DHCP server, which assigns the required IP address. When you are on a DHCP server with DNS capability, you can connect to the SharpV using the SharpV name (for example, SharpV1234567) rather than the IP address (for example, 192.168.10.100).

   Use static IP address

   Select this option to use a static address for the SharpV.

   IMPORTANT: If you are streaming video to the Security Center Archiver role, ensure that the SharpV IP address does not change.

4. If you selected Use static IP address configure the following:

   IP adress

   Type the new IP address you want to assign to the SharpV. 10.0.0.1 is the default.

   Subnet mask

   Type the new Subnet mask if applicable. 255.255.0.0 is the default.

   Gateway

   Type the new Gateway if applicable. 10.0.0.0 is the default.

   DNS

   Type the new DNS if applicable. 10.0.0.0 is the default.

5. Click Save.