This section lists the settings found in the Overview page of the Sharp Portal and provides general information about the SharpV, such as serial number, license, IP address, input and relay status, and so on.
To navigate to the Overview page, click .
Camera info
The following information is displayed:
- Serial number
- Displays the SharpV hardware serial number.
- License
- Displays whether the SharpV license is valid, invalid, or missing.
- Inputs
- Displays the inputs on the SharpV and whether the input is in a High or Low state. A high-state input is indicative of a voltage of 5.75 V or higher. A low-state input is indicative of a voltage of 4.80 V or lower.
- Outputs
- Displays the SharpV outputs and whether the output is in an On or Off state. The SharpV has two dry-type, solid-state (transistor) polarized outputs. When the output is On, the circuit is closed. When the output is Off, it is open.
- Test outputs
- Click to toggle your configured output between On and Off to validate the configuration.
- Mac address
- Displays the MAC address of the SharpV. This information might be requested if you contact technical support.
- Type
- Displays the type of Sharp unit.
- Illuminator
- Displays the camera's LED wavelength and range option.
- Power source
- Displays the power being supplied to the unit.
- Platform
- Displays the software image installed on the SharpV. If you contact technical support, you might be asked to provide this number.
- Version
- Firmware
- Displays the update status of the Sharp unit.
- Details
- Provides additional information about the versions of the files and components included in the package.
- Cameras
- Displays the resolution and the lens focal range available for cameras connected to the SharpV unit.
- Location
- Displays the coordinates configured in Security Center. If the SharpV unit includes GPS, the GNSS location is displayed. Click Locate on map to display the camera's position on a map.
Connectivity
The following information is displayed:
- IP addresses
- Displays the IPv4 and IPv6 addresses of the SharpV.
- Cellular
- Displays the public or private static IP address for SharpV G3 LTE units that include a SIM card.
- Security Center
- Displays the address for the Security Center server and failover server.
- Internet
- Displays whether the SharpV is connected to the Internet.
Video streams
- Video streams
- If the SharpV has been added to the Security Center Archiver and is being used to monitor video, then the camera name, client IP address, frame rate, and encoding format are listed for each stream.
Storage and usage
You can view information about reads stored on the SharpV, CPU usage, and memory usage. Indicator lines, usually green or orange, are provided so you can see the status. If an indicator line stays red for a prolonged period of time, it indicates either high CPU activity or that there is a problem.
- Reads stored
- Indicates the reads stored in the database of the SharpV. The number of reads is also displayed.
- Memory
- Displays information on the system's RAM memory.
- CPU (Total)
- Indicates the total CPU usage of the SharpV. Click Show details to see the usage for each CPU.
- Configuration drive
- Indicates the available space in the drive that contains configuration files, logs, licenses, and so on.
- Storage drive
- Indicates the space available in the drive that contains license plate reads.
Last activities
- Unit rebooted
- Indicates the last time the unit was restarted.
- Software restarted
- Indicates the last time the PlateReader software was restarted.