SharpV mounting hardware - SharpV | SharpOS 14.2

AutoVu™ SharpV Deployment Guide 14.2

Applies to
SharpV | SharpOS 14.2
Last updated
2023-03-14
Content type
Guides > User guides
Language
English
Product
SharpOS
SharpV
Version
14.2

A Videotec WBJA (white) or WBJF (black) mounting bracket is included with the SharpV unit. You can also mount the unit using adapters for third-party mounting hardware or using your own custom solution.

If the provided wall mount bracket is not suitable for the installation, you have the following mounting options:
  • Use one of the provided third-party adapters listed in the Included mounting hardware section.
  • Purchase one of the Compatible Videotec mounts from a Videotec reseller.
  • Create a custom solution using the T-slots on the sides of the camera.

Included mounting hardware

When you purchase a SharpV camera unit, mounting hardware is included that is suitable for most wall-mount and pole-mount installations.
Tip: If you lose the rubber plug on the bottom of the camera, you must replace it. Always have extra plugs available (AU-H-SHPVCAPS).
Hardware Description Part number

Wall mount bracket

  • Wall mount bracket with pan-tilt joint
  • Available in black (WBJF) or white (WBJA)

Videotec: WBJF/WBJA

AU-H-V-ARM-BLACK

AU-H-V-ARM-WHITE

Pole adapter

  • Adapter for pole mounting of the provided wall mount bracket
  • Supports pole diameters from 7.6 cm (3 in) to 20.3 cm (8 in). Metal straps included. Installation requires a 6 mm (5/16 in) socket.

AU-H-V-POLEADPT-BLACK

AU-H-V-POLEADPT-WHITE

Pelco adapter

  • SharpV Pelco mounting bolt pattern adapter kit

AU-H-V-PELCOADPT-BLACK

AU-H-V-PELCOADPT-WHITE

Accessory kit

  • I/O connection plug
  • RJ45 bayonet plug
  • 2 spare rubber plugs for the reset button port (one black and one white)
AU-H-V-ACCYKIT-G3

Compatible Videotec mounts

The following Videotec mounts are compatible with the SharpV mounting hole pattern. For a full list of compatible Videotec mounting brackets, see the Videotec brackets datasheet.

IMPORTANT: If you purchase a Videotec mounting bracket, ensure that the mounting plate of the bracket you have selected has the same thickness as the provided bracket (WBJA/WBJF). If required, add washers to shim accordingly, so that you do not exceed the maximum bolt depth of 9.5 mm (0.37 in).
NOTE: All Videotec mount are white unless otherwise specified. For color options, contact a Videotec reseller.
Camera mount Description Part number
WBJA Wall mount bracket with pan-tilt joint (white) AU-H-V-ARM-WHITE
WBJF Wall mount bracket with pan-tilt joint (black) AU-H-V-ARM-BLACK
WBMA Wall mount bracket with pan-tilt joint (short)  
WFWCA Parapet mount with pan-tilt joint  
WCM3A Ceiling bracket with pan-tilt joint (square tubing)  
WCM5A Ceiling mount with pan-tilt joint (round tubing)  
WCPA Reinforcing support plate for poor consistency walls (BHWGC)  
WCWA Corner adapter for WBJA, WBMA  
WSFPA Pole mount adapter for pole diameters 65 mm (2.6 in) to 110 mm (4.3 in). Can mount WBJA or WBMA.  
DBHWGC Pole mount adapter for pole diameters 210 mm (8.3 in) to 225 mm (8.6 in). Requires WCPA to mount WBJA or WBMA.  

Videotec customer support

For information about compatible Videotec mounts, contact your Videotec representative:

Americas:
Tel: +1 518-825-0020
Email: info.usa@videotec.com
APAC
Tel: 852 2333 0601
Email: info.hk@videotec.com
EMEA
Tel: 39 0445 697411
Email: info@videotec.com
France and French-speaking countries in Africa
Tel: 33 1 60491816
Email: info.fr@videotec.com

For a full list of contacts, see http://www.videotec.com/en/page_556.html.