action
An action is a user-programmable function that can be triggered as an
automatic response to an event, such as door held open for too long or object left
unattended, or that can be executed according to a specific time table.
area
In Security
Center, an area
entity represents a concept or a physical location (room, floor, building, site, and so
on) used for grouping other entities in the system.
automatic enrollment
Automatic enrollment is when new IP units on a network are
automatically discovered by and added to Security Center. The role that is responsible
for the units broadcasts a discovery request on a specific port, and the units
listening on that port respond with a message that contains the connection information
about themselves. The role then uses the information to configure the connection to the
unit and enable communication.
automatic license plate recognition
Automatic license plate recognition (ALPR) is an image processing
technology used to read license plate numbers. ALPR converts license plate numbers
cropped from camera images into a database searchable format.
automatic license plate recognition (ALPR)
Acronym: ALPR
ALPR camera
An Automatic License Plate Recognition (ALPR) camera is a camera connected to an
ALPR unit that produces high resolution close-up images of license
plates.
ALPR context
An ALPR context is an ALPR optimization that improves license plate
recognition performance for license plates from a specific region (for example, New
York) or from a group of regions (for example, Northeast states).
ALPR Manager
The ALPR Manager role manages and controls the patrol vehicle
software (Genetec
Patroller™), Sharp cameras, and parking zones. The ALPR Manager
stores the ALPR data (reads, hits, timestamps, GPS coordinates, and so on) collected by
the devices.
ALPR rule
ALPR rule is a method used by Security Center and AutoVu™ for
processing a license plate read. An ALPR rule can be a hit rule or a parking
facility.
ALPR unit
An ALPR unit is a device that captures license plate numbers. An
ALPR unit typically includes a context camera and at least one ALPR
camera.
AutoVu™
The AutoVu™ automatic
license plate recognition (ALPR) system automates license plate reading and
identification, making it easier for law enforcement and for municipal and commercial
organizations to locate vehicles of interest and enforce parking restrictions. Designed
for both fixed and mobile installations, the AutoVu™ system is ideal for a variety of applications
and entities, including law enforcement, municipal, and commercial
organizations.
AutoVu MLC™
AutoVu MLC™ (Machine Learning
Core) replaces traditional rule-based ALPR technology with machine learning-based
algorithms to reduce common ALPR misreads and false positives. It is a proprietary
technology of Genetec Inc. used in AutoVu™
Sharp hardware for license plate
recognition.
auxiliary PoE camera
For a more detailed view of the area surrounding a
license plate read location, you can install AutoVu™ auxiliary PoE cameras on the parking
enforcement patrol vehicle.
capture rate
The capture rate measures the speed at which a license plate
recognition system can take a photo of a passing vehicle and detect the license plate in
the image.
certificate
Designates one of the following: (1) digital
certificate; (2) SDK certificate.
Config Tool
Config
Tool is
the Security
Center administrative application
used to manage all Security
Center users and to
configure all Security
Center entities such as
areas, cameras, doors, schedules, cardholders, patrol vehicles, ALPR units, and hardware
devices.
context camera
A context camera is a camera connected to an ALPR unit that
produces a wider angle color image of the vehicle whose license plate was read by the
ALPR camera.
contract permit parking
Contract permit parking is a parking scenario where only
drivers with monthly permits can park in the parking zone. A whitelist is used to grant
permit holders access to the parking zone.
Copy configuration tool
The Copy configuration tool helps you save configuration time
by copying the settings of one entity to many others that partially share the same
settings.
covert hit
A covert hit is a read (captured license plate) that is matched to a
covert hotlist. Covert hits are not displayed on the Genetec
Patroller™ screen, but can be displayed in Security
Desk by a user with proper
privileges.
covert hotlist
Covert hotlists allow you to ensure the discretion of an
ongoing investigation or special operation. When a hit is identified, only the
authorized officer at the Security
Center
station is notified, while the officer in the patrol vehicle is not alerted. This
enables enforcement officials to assign multiple objectives to the vehicle and back-end
systems, while not interrupting the priorities of officers on duty.
custom event
A custom event is an event added after the initial system
installation. Events defined at system installation are called system events. Custom
events can be user-defined or automatically added through plugin installations. Unlike
system events, custom events can be renamed and deleted.
custom field
A custom field is a user-defined property that is associated
with an entity type and is used to store additional information that is useful to your
organization.
Daily usage per patroller entity
Daily usage per patroller entity is a type of
investigation task that reports on the daily usage statistics of a selected patrol vehicle
(operating time, longest stop, total number of stops, longest shutdown, and so on) for a given
date range.
dashboard
A dashboard is one of the three panels that belong to the canvas in
Security Desk. It contains the graphical commands (or widgets) pertaining to the entity
displayed in the current tile.
database server
A database server is an application that manages databases and
handles data requests made by client applications. Security Center uses Microsoft SQL
Server as its database server.
Directory
The Directory role identifies a Security
Center system. It manages all entity
configurations and system-wide settings.
Only a single instance of this role is permitted on
your system. The server hosting the Directory role is called the main server, and
must be set up first. All other servers you add in Security Center are called
expansion servers, and must connect to the main server to be part of the same
system.
Directory Manager
The Directory Manager role manages the Directory
failover and load balancing in order to produce the high availability characteristics in
Security
Center.
Directory server
A Directory server is any one of the multiple servers
simultaneously running the Directory role in a high availability
configuration.
discovery port
A discovery port is a port used by certain Security Center roles
(Access Manager, Archiver, ALPR Manager) to find the units they are responsible for on
the LAN. No two discovery ports can be the same on one system.
district
A district is a type of parking regulation characterizing an overtime
rule. A district is a geographical area within a city. A vehicle is in violation if it
is seen within the boundaries of the district over a specified period of
time.
enforce
To enforce is to take action following a confirmed hit. For example, a
parking officer can enforce a scofflaw violation (unpaid parking tickets) by placing a
wheel boot on the vehicle.
entity
Entities are the basic building blocks of Security Center. Everything
that requires configuration is represented by an entity. An entity can represent a
physical device, such as a camera or a door, or an abstract concept, such as an alarm, a
schedule, a user, a role, a plugin, or an add-on.
entity tree
An entity tree is the graphical representation of Security Center
entities in a tree structure, illustrating the hierarchical nature of their
relationships.
event
An event indicates the occurrence of an activity or incident, such
as access denied to a cardholder or motion detected on a camera. Events are
automatically logged in Security
Center. Every
event has an entity as its main focus, called the event source.
event-to-action
An event-to-action links an action to an event. For example, you
can configure Security
Center to trigger an
alarm when a door is forced open.
expansion server
An expansion server is any server machine in a Security Center
system that does not host the Directory role. The purpose of the expansion server is to
add to the processing power of the system.
failover
Failover is a backup operational mode in which a role (system
function) is automatically transferred from its primary server to a secondary server
that is on standby. This transfer between servers occurs only if the primary server
becomes unavailable, either through failure or through scheduled downtime.
false positive read
False positive plate reads can occur when a license plate
recognition system mistakes other objects in an image for license plates. For example,
lettering on a vehicle or street signs can sometimes create false positive plate
reads.
federated entity
A federated entity is any entity that is imported from an
independent system through one of the Federation™
roles.
federated system
A federated system is a independent system (Omnicast™ or
Security Center) that is unified under your local Security Center via a Federation™
role, so that the local users can view and control its entities, as if they belong to
the local system.
Federation™
The Federation™ feature
joins multiple, independent Genetec™ IP
security systems into a single virtual system. With this feature, users on the central
Security Center system can view and control entities that belong to remote
systems.
Fuzzy matching
Environmental factors such as dirt or snow can partially
obstruct license plate characters and increase the likelihood of partial plate reads
occurring. In addition, similarly shaped letters and numbers, like “2” and “Z” or, “8”,
“B”, and “0”, can also reduce plate read accuracy. Fuzzy matching lets AutoVu™ compare reads not only to exact matches in
hotlists, but also to potential or probable matches.
Genetec Patroller™
Genetec
Patroller™ is the software
application installed on an in-vehicle computer that analyzes license plate reads from
AutoVu™
Sharp camera units. The application can be
installed to operate in different modes to suit your specific enforcement needs and can
be configured to notify the vehicle operator if immediate action is
required.
Genetec™ Server
Genetec™ Server is the Windows service that is at the core of
Security Center architecture, and that must be installed on every computer that is part
of the Security Center's pool of servers. Every such server is a generic computing
resource capable of taking on any role (set of functions) you assign to
it.
geocoding
Geocoding is the process of finding associated geographic
coordinates (latitude and longitude) from a street address.
georeferencing
Georeferencing is the process of using an object’s
geographic coordinates (latitude and longitude) to determine its position on a
map.
ghost patroller entity
A ghost patroller entity is automatically created by
the ALPR Manager when the AutoVu™ license
includes the XML Import module. In Security Center, all ALPR data must be associated to a
Genetec
Patroller™ entity or an ALPR unit
corresponding to a fixed Sharp camera. When you
import ALPR data from an external source via a specific ALPR Manager using the XML Import
module, the system uses the ghost entity to represent the ALPR data source. You can
formulate queries using the ghost entity as you would with a normal
entity.
Geographic Information System
Geographic Information System (GIS) is a system that captures spatial
geographical data. Map Manager can connect to third-party vendors that provide GIS
services in order to bring maps and all types of geographically referenced data to
Security Center.
Geographic Information System (GIS)
Acronym:
GIS
Hardware inventory
Hardware inventory is a type of maintenance task that
reports on the characteristics (unit model, firmware version, IP address, time zone, and
so on) of access control, video, intrusion detection, and ALPR units in your system.
hash function
In cryptography, a hash function uses a mathematical
algorithm to take input data and return a fixed-size alphanumeric string. A hash
function is designed to be a one-way function, that is, a function which is infeasible
to revert.
hit
A hit is a license plate read that matches a hit rule, such as a hotlist,
overtime rule, permit, or permit restriction. A Genetec
Patroller™ user can choose to reject or accept a hit.
An accepted hit can subsequently be enforced.
hit rule
Hit rule is a type of ALPR rule used to identify vehicles of interest
(called "hits") using license plate reads. The hit rules include the following types:
hotlist, overtime rule, permit, and permit restriction.
Hits
Hits is a type of investigation task that reports on hits reported
within a selected time range and geographic area.
hot action
A hot action is an action mapped to a PC keyboard function key
(Ctrl+F1 through Ctrl+F12) in Security Desk for quick access.
hotlist
A hotlist is a list of wanted vehicles, where each vehicle is
identified by a license plate number, the issuing state, and the reason why the vehicle
is wanted (stolen, wanted felon, Amber alert, VIP, and so on). Optional vehicle
information might include the model, the color, and the vehicle identification number
(VIN).
Hotlist and permit editor
Hotlist and permit editor is a type of operation task
used to edit an existing hotlist or permit list. A new list cannot be created with this
task, but after an existing list has been added to Security Center, users can edit, add,
or delete items from the list, and the original text file is updated with the
changes.
illuminator
An illuminator is a light in the Sharp unit that illuminates the
plate, thereby improving the accuracy of the images produced by the ALPR
camera.
incident
An incident is an unexpected event reported by a Security Desk user.
Incident reports can use formatted text and include events and entities as support
material.
Incidents
Incidents is a type of investigation task that allows you to
search, review, and modify incident reports.
Inventory report
Inventory report is a type of investigation task that allows
you to view a specific inventory (vehicle location, vehicle length of stay, and so on)
or compare two inventories of a selected parking facility (vehicles added, vehicles
removed, and so on).
I/O linking
I/O (input/output) linking is controlling an output relay based on
the combined state (normal, active, or trouble) of a group of monitored inputs. A
standard application is to sound a buzzer (through an output relay) when any window on
the ground floor of a building is shattered (assuming that each window is monitored by a
"glass break" sensor connected to an input).
IPv4
IPv4 is the first generation Internet protocol using a 32-bit address
space.
IPv6
IPv6 is a 128-bit Internet protocol that uses eight groups of four
hexadecimal digits for address space.
Kashef Third-Party Matcher
The AutoVu™ - Kashef
Third Party Matcher plugin forwards license plate reads to the Kashef API and triggers
alarms based on the vehicle legal status returned from Kashef.
Law Enforcement
Law Enforcement is a Genetec
Patroller™ software installation that is configured
for law enforcement: the matching of license plate reads against lists of wanted license
plates (hotlists). The use of maps is optional.
license key
A license key is the software key used to unlock the Security
Center software. The license key is specifically generated for each computer where the
Directory role is installed. To obtain your license key, you need the System ID
(which identifies your system) and the Validation key (which identifies your
computer).
license plate inventory
A license plate inventory is a list of license plate
numbers of vehicles found in a parking facility within a given time period, showing
where each vehicle is parked (sector and row).
license plate read
A license plate read is a license plate number captured from
a video image using ALPR technology.
live hit
A live hit is a hit matched by the Genetec
Patroller™ and immediately sent to the Security
Center over a wireless
network.
live read
A live read is a license plate captured by the patrol vehicle and
immediately sent to Security
Center over a
wireless network.
load balancing
Load balancing is the distribution of workload across multiple
computers.
logical ID
Logical ID is a unique ID assigned to each entity in the system for
ease of reference. Logical IDs are only unique within a particular entity
type.
Logons per Patroller
Logons is a type of investigation task that reports on the
logon records of a selected patrol vehicle.
long term
Long term is a type of parking regulation characterizing an
overtime rule. The long term regulation uses the same principle as the same
position regulation, but the parking period starts on one calendar date and ends
on another calendar date. No more than one overtime rule can use the long term
regulation in the entire system.
macro
A macro is a type of entity that encapsulates a C# program that adds
custom functionalities to Security Center.
main server
The main server is the only server in a Security Center
system hosting the Directory role. All other servers on the system must connect to the
main server to be part of the same system. In a high availability configuration where
multiple servers host the Directory role, it is the only server that can write to the
Directory database.
manual capture
Manual capture is when license plate information is entered into
the system by the user and not by the ALPR.
map link
A map link is a map object that brings you to another map with a
single click.
map mode
Map mode is a Security
Desk canvas operating mode that replaces tiles
and controls with a geographical map showing all active, georeferenced events in your
system. Switching to Map mode is a feature that comes with
AutoVu™, Genetec Mission
Control™, or Record fusion, and requires a license
for one of these major
features.
map object
Map objects are graphical representations on your maps of
Security Center entities or geographical features, such as cities, highways, rivers, and so
on. With map objects, you can interact with your system without leaving your
map.
map view
A map view is a defined section of a map.
Mobile Data Computer
Mobile Data Computer is a tablet computer or ruggedized laptop used
in patrol vehicles to run the Genetec
Patroller™
application. The MDC is typically equipped with a touch-screen with a minimum resolution
of 800 x 600 pixels and wireless networking capability.
Mobile Data Computer (MDC)
Acronym:
MDC
Mobile License Plate Inventory
Mobile License Plate Inventory (MLPI) is the Genetec
Patroller™ software installation that is configured
for collecting license plates and other vehicle information for creating and maintaining
a license plate inventory for a large parking area or parking garage.
Mobile License Plate Inventory (MLPI)
Acronym:
MLPI
Mobile Admin
(Obsolete as of SC 5.8 GA) Mobile Admin is a web-based
administration tool used to configure the Mobile
Server.
Mobile Server
The Mobile Server role provides Security
Center access on mobile
devices.
Monitoring
The Monitoring task is a type of operation
task that you can use to monitor and respond to real-time events that relate to selected
entities. Using the Monitoring task, you can also monitor and
respond to alarms.
network
The network entity is used to capture the characteristics of the
networks used by your system so that proper stream routing decisions can be
made.
network address translation
Network address translation is the process of modifying
network address information in datagram (IP) packet headers while in transit across a
traffic routing device, for the purpose of remapping one IP address space into
another.
network view
The network view is a browser view that illustrates your network
environment by showing each server under the network they belong to.
new wanted
A new wanted is a manually entered hotlist item in Genetec
Patroller™. When you are looking for a plate that
does not appear in the hotlists loaded in the Genetec
Patroller™, you can enter the plate in order to raise
a hit if the plate is captured.
notification tray
The notification tray contains icons that allow quick access
to certain system features, and also displays indicators for system events and status
information. The notification tray display settings are saved as part of your user
profile and apply to both Security Desk and Config Tool.
OCR equivalence
OCR equivalence is the interpretation of OCR (Optical Character
Recognition) equivalent characters performed during license plate recognition. OCR
equivalent characters are visually similar, depending on the plate’s font. For example,
the letter “O” and the number “0”, or the number “5” and the letter “S”. There are
several pre-defined OCR equivalent characters for different languages.
odometry sensor
To track and display a patrol vehicle's position
accurately on a map, you can provide an odometry signal to the SharpZ3 system by installing an odometry sensor on
the drive shaft of the vehicle.
output behavior
An output behavior is a type of entity that defines a custom
output signal format, such as a pulse with a delay and duration.
overtime rule
An overtime rule is a type of entity that defines a parking time limit and the maximum number of violations enforceable within a single day. Overtime rules are used in city and university parking enforcement. For university parking, an overtime rule also defines the parking area where these restrictions apply.
parking facility
A parking facility is a type of entity that defines a large
parking area as a number of sectors and rows for the purpose of inventory
tracking.
parking lot
A parking lot is a polygon that defines the location and shape of
a parking area on a map. By defining the number of parking spaces inside the parking
lot, Security Center can calculate its percentage of occupancy during a given time
period.
parking zone
The parking zones that you define in Security
Center represent off-street parking lots where the entrances and exits are monitored by Sharp cameras.
partition
A partition is a type of entity that defines a set of entities that
are only visible to a specific group of users. For example, a partition could include
all areas, doors, cameras, and zones in one building.
partition administrator
(Obsolete) Beginning in Security Center 5.7 GA,
privileges that used to be exclusive to administrators can now be granted individually,
making the concept of partition administrator obsolete.
patrol vehicle
A patrol vehicle monitors parking lots and city streets
for parking violations or wanted vehicles. A patrol vehicle includes one or more
Sharp automatic license plate recognition
(ALPR) cameras and an in-vehicle computer running Genetec
Patroller™ software.
patroller entity
A patroller entity in Security
Center represents a patrol vehicle equipped
with an in-vehicle computer running Genetec
Patroller™
software.
Patroller Config Tool
Genetec
Patroller™ Config Tool is the Genetec
Patroller™ administrative application used to
configure Patroller-specific settings, such as adding Sharp cameras to the in-vehicle LAN, enabling
features such as Manual Capture or New Wanted, and specifying that a username and
password are needed to log on to Genetec
Patroller™.
Patroller tracking
Patroller tracking is a type of investigation task
that allows you to replay the route followed by a patrol vehicle on a given date on a
map, or view the current location of patrol vehicles on a map.
permit
A permit is a type of entity that defines a single parking permit
holder list. Each permit holder is characterized by a category (permit zone), a license
plate number, a license issuing state, and optionally, a permit validity range
(effective date and expiry date). Permits are used in both city and university parking
enforcement.
permit hit
A permit hit is a hit that is generated when a read (license plate
number) does not match any entry in a permit or when it matches an invalid
permit.
permit restriction
A permit restriction is a type of entity that applies
time restrictions to a series of parking permits for a given parking area. Permit
restrictions can be used by patrol vehicles configured for University Parking
Enforcement and for systems that use the AutoVu™
Free-Flow feature.
Plate link
When a patrol vehicle that is registered with Plate link
enters a parking zone, it downloads all recent plate reads and hits from other patrol
vehicles that are registered with the same account. This data sharing ensures that the
system catches parking violations that would otherwise be missed.
Plate Reader
Plate Reader is the software component of the Sharp unit that processes the images captured by the
ALPR camera to produce license plate reads, and associates each license plate read with a
context image captured by the context camera. The Plate Reader also handles the
communications with the Genetec
Patroller™ and the ALPR
Manager. If an external wheel imaging camera is connected to the Sharp unit, the Plate Reader also captures wheel
images from this camera.
plugin
A plugin (in lowercase) is a software component that adds a
specific feature to an existing program. Depending on the context, plugin can refer
either to the software component itself or to the software package used to install the
software component.
plugin role
A plugin role adds optional features to Security
Center. A plugin role is created by using
the Plugin role template. By default, it is represented by an orange puzzle piece
in the Roles view of the System task.
Before you can create a plugin role, the software
package specific to that role must be installed on your system.
Post-Payment
The AutoVu™
Post-Payment plugin validates the parking session against the parking lot rules and the
payment provider database, and then sends an evidence package to ticketing system if an
infraction is detected.
primary server
Primary server is the default server chosen to perform a
specific function (or role) in the system. To increase the system's fault-tolerance, the
primary server can be protected by a secondary server on standby. When the primary
server becomes unavailable, the secondary server automatically takes
over.
private IP address
A private IP address is an IP address chosen from a
range of addresses that are only valid for use on a LAN. The ranges for a private IP
address are: 10.0.0.0 to 10.255.255.255, 172.16.0.0 to 172.16.255.255, and 192.168.0.0
to 192.168.255.255. Routers on the Internet are normally configured to discard any
traffic using private IP addresses.
private task
A private task is a saved task that is only visible to the
user who created it.
privilege
Privileges define what users can do, such as arming zones,
blocking cameras, and unlocking doors, over the part of the system they have access
rights to.
public task
A public task is a saved task that can be shared and reused among multiple Security Center users.
read rate
The read rate measures the speed at which a license plate
recognition system can correctly detect and read all of the characters in an image of a
license plate.
Reads
Reads is a type of investigation task that reports on license plate
reads performed within a selected time range and geographic area.
Reads/hits per day
Reads/hits per day is a type of investigation task that
reports on license plate reads performed within a selected time range and geographic
area.
Reads/hits per zone
Reads/hits per zone is a type of investigation task that reports on the number of reads and hits per parking area for a selected date range.
Report Manager
Report Manager is a type of role that automates report emailing
and printing based on schedules.
report pane
Report pane is one of the panes found in the Security Desk task
workspace. It displays query results or real-time events in a tabular
form.
reverse geocoding
Reverse geocoding is an AutoVu™ feature that translates
a pair of latitude and longitude into a readable street address.
role
A role is a software component that performs a specific job within
Security Center. To execute a role, you must assign one or more servers to host
it.
salt (cryptography)
In cryptography, a salt is data that is used as an additional input
to the information you want to encrypt or protect with a hash function, so that the
original information is nearly impossible to guess, even when the attacker knows what
algorithm is being used.
same position
Same position is a type of parking regulation characterizing an
overtime rule. A vehicle is in violation if it is seen parked at the exact same spot
over a specified period of time. Genetec
Patroller™ must
be equipped with GPS capability in order to enforce this type of
regulation.
schedule
A schedule is a type of entity that defines a set of time constraints
that can be applied to a multitude of situations in the system. Each time constraint is
defined by a date coverage (daily, weekly, ordinal, or specific) and a time coverage
(all day, fixed range, daytime, and nighttime).
scheduled task
A scheduled task is a type of entity that defines an action that
executes automatically on a specific date and time, or according to a recurring
schedule.
Software Development Kit
The Software Development Kit (SDK) allows end-users to develop custom
applications or custom application extensions for Security Center.
Software Development Kit (SDK)
Acronym:
SDK
secondary server
A secondary server is any alternate server on standby intended
to replace the primary server in the case the latter becomes
unavailable.
Also known as: standby
server
Security Center
Security
Center
is a truly unified platform that blends IP video surveillance, access control, license
plate recognition, intrusion detection, and communications within one intuitive and
modular solution. By taking advantage of a unified approach to security, your
organization becomes more efficient, makes better decisions, and responds to situations
and threats with greater confidence.
Security Center Federation™
The Security Center Federation™ role connects a
remote, independent Security Center system to your local Security Center. That way, the
remote system's entities and events can be used in your local system.
Security Desk
Security
Desk
is the unified user interface of Security
Center. It provides consistent operator flow across all of the Security
Center main systems, Omnicast™, Synergis™, and AutoVu™. The unique task-based design of Security
Desk lets operators efficiently
control and monitor multiple security and public safety applications.
server
A server is a type of entity that represents a server machine on
which the Genetec™ Server service is installed.
Server Admin
Server Admin is the web application running on every server
machine in Security Center that allows you to configure the settings of Genetec Server.
Server Admin also allows you to configure the Directory role on the main
server.
SharpOS
SharpOS is the
software component of a Sharp unit. SharpOS is responsible for everything related to plate
capture, collection, processing, and analytics. For example, a SharpOS update can include new ALPR contexts, new
firmware, Sharp
Portal updates, and updates to
the Sharp's Windows services (Plate Reader, HAL, and so on).
Sharp Portal
Sharp Portal is a web-based administration tool used to
configure Sharp cameras for AutoVu™ systems. From a web browser, you log on to a specific IP
address (or the Sharp name in certain cases) that corresponds to the Sharp you want to
configure. When you log on, you can configure options such as selecting the ALPR context (for
example, Alabama, Oregon, Quebec), selecting the read strategy (for example, fast moving or
slow moving vehicles), viewing the Sharp’s live video feed, and more.
Sharp unit
The Sharp unit is a proprietary ALPR unit of Genetec Inc. that
integrates license plate capturing and processing components, as well as digital video
processing functions, inside a ruggedized casing.
SharpZ3
SharpZ3 is a
proprietary mobile ALPR system designed by Genetec Inc. that integrates license plate cameras
and a trunk unit that is responsible for ALPR processing as well as communication with
the Genetec
Patroller™ software running on the
in-vehicle computer.
SharpZ3 ALPR module
ALPR modules are available for the SharpZ3 trunk unit which can support either two or
four SharpZ3 cameras.
SharpZ3 auxiliary camera bracket
To mount an AutoVu™
auxiliary PoE camera beside a SharpZ3 camera,
you can install a SharpZ3 auxiliary camera
bracket on the SharpZ3 hardmount.
SharpZ3 base unit
The SharpZ3
base unit is the processing component of the SharpZ3 system. The base unit includes the ALPR
module and up to three expansion modules that are used to add features to the system
such as precise navigation, PoE ports for wheel imaging cameras, and so
on.
SharpZ3 expansion module
Up to three expansion modules can be added to the
SharpZ3 base unit. The modules add
additional functionality to the base system. For example, you can add modules for
precise navigation, PoE ports for wheel imaging cameras, and so on.
standard schedule
A standard schedule is a type of schedule entity that may be
used in all situations. Its only limitation is that it does not support daytime or
nighttime coverage.
system event
A system event is a predefined event that indicates the occurrence
of an activity or incident. System events are defined by the system and cannot be
renamed or deleted.
System status
System status is a type of maintenance task that monitors the
status of all entities of a given type in real time, and allows you to interact with
them.
task
A task is the central concept on which the entire Security Center user
interface is built. Each task corresponds to one aspect of your work as a security
professional. For example, use a monitoring task to monitor system events in real-time,
use an investigation task to discover suspicious activity patterns, or use an
administration task to configure your system. All tasks can be customized and multiple
tasks can be carried out
simultaneously.
taskbar
A taskbar is a user interface element of the Security Center client
application window, composed of the Home tab and the active task list. The taskbar can
be configured to appear on any edge of the application window.
task workspace
A task workspace is an area in the Security Center client
application window reserved for the current task. The workspace is typically divided
into the following panes: canvas, report pane, controls, and area view.
tile
A tile is an individual window within the canvas, used to display a
single entity. The entity displayed is typically the video from a camera, a map, or
anything of a graphical nature. The look and feel of the tile depends on the displayed
entity.
timeline
A timeline is a graphic illustration of a video sequence, showing
where in time, motion, and bookmarks are found. Thumbnails can also be added to the
timeline to help the user select the segment of interest.
transient parking
Transient parking is a parking scenario where the driver must
purchase parking time as soon as the vehicle enters the parking lot.
unit
A unit is a hardware device that communicates over an IP network that can
be directly controlled by a Security Center role. We distinguish four types of
units in Security Center:
- Access control units, managed by the Access Manager role
- Video units, managed by the Archiver role
- ALPR units, managed by the ALPR Manager role
- Intrusion detection units, managed by the Intrusion Manager role
Unit replacement
Unit replacement is a tool that is used to replace a failed
hardware device with a compatible one, while ensuring that the data associated to the
old unit gets transferred to the new one. For an access control unit, the configuration
of the old unit is copied to the new unit. For a video unit, the video archive
associated to the old unit is now associated to the new unit, but the unit configuration
is not copied.
University Parking Enforcement
University Parking Enforcement is a Genetec
Patroller™ software installation that is configured
for university parking enforcement: the enforcement of scheduled parking permits or
overtime restrictions. The use of maps is mandatory. Hotlist functionality is also
included.
unreconciled read
A unreconciled read is a MLPI license plate read that has not
been committed to an
inventory.
user
A user is a type of entity that identifies a person who uses Security
Center applications and defines the rights and privileges that person has on the system.
Users can be created manually or imported from an Active Directory.
user group
A user group is a type of entity that defines a group of users who
share common properties and privileges. By becoming member of a group, a user
automatically inherits all the properties of the group. A user can be a member of
multiple user groups. User groups can also be nested.
user level (Security Center)
A user level is a numeric value assigned to users to restrict their ability to perform certain operations, such as controlling a camera PTZ, viewing the video feed from a camera, or staying logged on when a threat level is set. Level 1 is the highest user level, with the most privileges.
validation key
A validation key is a serial number uniquely identifying a
computer that must be provided to obtain the license key.
vehicle identification number
A vehicle identification number (VIN) is an identification number that a
manufacturer assigns to vehicles. This is usually visible from outside the vehicle as a
small plate on the dashboard. A VIN can be included as additional information with
license plate entries in a hotlist or permit list, to further validate a hit and ensure
that it is the correct vehicle.
vehicle identification number (VIN)
Acronym:
VIN
wheel imaging
Wheel imaging is a virtual tire-chalking technology that takes
images of the wheels of vehicles to prove whether they have moved between two license
plate reads.
whitelist
A whitelist is a hotlist that is created for the purpose of
granting a group of license plates access to a parking lot. A whitelist can be compared
to an access rule where the secured area is the parking lot. Instead of listing the
cardholders, the whitelist applies to license plate credentials.
widget
A widget is a component of the graphical user interface (GUI) with
which the user interacts.
Zone occupancy
Zone occupancy is a type of investigation task that reports on the number of vehicles parked in a selected parking area, and the percentage of occupancy.