This section lists the settings found in the ALPR settings page of the Sharp Portal Use the ALPR settings page to configure the analytics used for the license plates read by the SharpZ3.
To navigate to the ALPR settings page, click .
The following information is displayed:
Location
- Context
- Select which plate origin the SharpZ3 is reading.
Analytics:
- State
- Select this option if you want the SharpZ3 unit to attempt read the license plate origin. Depending on the region, this can refer to the issuing state, province, or country.
- Vehicle make
- Select this option if you want the SharpZ3 unit to attempt to read the vehicle’s make from the brand or logo (Honda, Toyota, and so on).
- Confidence score
- The SharpZ3 assigns a confidence score percentage to each
license plate read. This value indicates how confident the SharpZ3 is in the accuracy of the read. NOTE: License plates that contain similar characters such as 8 and B are more difficult to read and generally produce reads with a lower confidence score.
- Vehicle type and color
- Select this option if you want to include the vehicle type and vehicle color with plate reads. Based on the context image, the Sharp unit can detect if the vehicle is a bus, passenger vehicle, motorcycle, pickup, truck, work van, or an unknown vehicle type. In addition, the Sharp unit can detect if the vehicle is black, white, blue, brown, green, gray, orange, red, or yellow. Colors excluding white and black are also assigned light, neutral, or dark according to the color analysis.
Reads
- Reading mode
- Select one of the following reading modes:
- Continuous
- Select this for plates to be captured continuously. This is the default setting.
- Conditional
- When this option is selected, the SharpZ3 captures plate reads continuously as long as the selected input signal meets the condition defined (high/low). You must select an input and specify whether the state is high or low.
- Multiconditional
- Generates reads from a specific camera only while an input's status meets the defined high or low condition. This option is required if using the AutoVu™ car camera switch.
Read strategy
- Slow-moving vehicle
- Select this strategy for fixed Sharp cameras monitoring parking lots and for mobile Sharp cameras used for parking enforcement. Generally results in better ALPR accuracy, but occasionally misses or duplicates plate reads.
- Fast-moving vehicle
- Select this strategy for fixed Sharp cameras monitoring highways and for mobile Sharp cameras used for law enforcement. This strategy obtains ALPR reads quickly, but often duplicates reads if the plate is in the field of view for a long time.