Aligning SharpZ3 camera tilt in the Sharp Portal - SharpZ3 | SharpOS 13.7

AutoVu™ SharpZ3 Administrator Guide 13.7
Product
SharpZ3
Content type
Guides > Administrator guides
Version
13.7
Language
English
Last updated
2024-09-06

After you manually adjust the pan and roll of the SharpZ3 camera, you can adjust the vertical tilt in the Sharp Portal.

Before you begin

Before you align the SharpZ3 vertical tilt in the Sharp Portal, do the following:
  1. Set the camera roll to be level with the ground. For more information, see Aligning the SharpZ3 cameras.
  2. Set the camera pan angle. For more information, see Aligning the SharpZ3 cameras.

Procedure

  1. In the Sharp Portal, navigate to the Dashboard > Camera feeds page.
  2. Select the camera unit from the Camera unit menu.
  3. From the Overlays menu, select Crosshairs.
    Crosshairs are displayed on the video feed.
  4. Adjust the SharpZ3 camera unit vertical tilt until the crosshairs in the camera feed meet the crosshairs on the center of the target license plate.
    Aligning the target license plate in the Sharp Portal.

After you finish

Repeat the alignment steps for the remaining SharpZ3 camera units.