SharpOS 13.7 Sharp Portal - Recovery page - SharpZ3 | SharpOS 13.7

To navigate to the Recovery page, click Configuration > General settings > Recovery.

The following information is displayed:

Settings

Export diagnostics

Export a file that includes SharpZ3 diagnostics and SharpZ3 settings.

Export settings

Exports configuration and diagnostic settings as a .zip file. You can use the .zip file for technical support, or you can import the settings to another Sharp unit for quick configuration

Import settings

Imports configuration settings from a .zip file exported from another Sharp. You can use this .zip file to quickly configure your Sharp. After you import the settings, the Plate Reader service restarts automatically.

IMPORTANT: You can only import settings from a similar Sharp (same model and Sharp OS version).

Reset to factory default

Click to reset the SharpZ3 to use the factory default settings. A message confirms the reset and offers to optionally clear the network settings as well. Note that some settings are never cleared, such as battery settings and certificates.

NOTE: The passwords for auxiliary cameras are not reset during a factory reset. You must enter the passwords again in Configuration > Cameras > Auxiliary cameras

Syslog

Use Syslog server

Select this option to configure a central repository for all SharpZ3 log entries.

Server

Enter the IP address or name of the server.

NOTE: Syslog server configurations do not support IPv6 addresses.

Port

Enter the port number of the syslog server.

Network protocol

Select UDP or TCP.