After the tilt-pivot head is attached to the tele-pole, you can attach the tablet mount to the tilt-pivot head.
Ensure that you have all of the required hardware:
Before you begin
- Tablet mount
- Tilt-pivot head
- 4 x ¾" flat head screws
- 4 x serrated flange nuts
You must connect the tablet mount to the tilt-pivot head as shown before connecting the keyboard tray to the tablet mount.
What you should know
The tablet mount (A) and the tilt-pivot head should both be able to tilt
towards the user. Orient the tablet mount and the tilt-pivot head as
NOTE: The adjustment knob on the tilt-pivot head might be on either side depending on how it was assembled by the manufacturer.
Connect the tablet mount (B) to the tilt-pivot head using the four ¾" flat head
screws and serrated flange nuts in the mounting holes (C) shown in the following