Installing the SharpZ3 ALPR module - SharpZ3 | SharpOS 13.1

AutoVu™ SharpZ3 Deployment Guide 13.1

Applies to
SharpZ3 | SharpOS 13.1
Last updated
2020-07-14
Content type
Guides
Guides > Deployment guides
Language
English (United States)
Product
SharpZ3
Version
13.1

To connect SharpZ3 cameras to the base unit, you must install an ALPR module. ALPR modules are available for two-camera or four-camera systems.

Before you begin

To complete these steps, you need the following:
  • Phillips #1 screwdriver

Procedure

  1. Place the ALPR module on the base unit and slide it into place.
  2. Firmly press the module to ensure that the connection at the back of the module is solid.
  3. Secure the ALPR module using the provided Phillips screws.