SharpOS 13.1 Sharp Portal - Power options page - SharpZ3 | SharpOS 13.1

AutoVu™ SharpZ3 Deployment Guide 13.1

Applies to
SharpZ3 | SharpOS 13.1
Last updated
2020-07-14
Content type
Guides
Guides > Deployment guides
Language
English (United States)
Product
SharpZ3
Version
13.1

This section lists the settings found in the Power options page of the Sharp Portal. Use the Power options page to configure the camera based on the power grid of the installation location.

To navigate to the Power options page, click Configuration > General settings > Power options.

The following information is displayed:

Power line frequency
Select the power line frequency that corresponds to the installation location.
60 Hz
Generally used in North America and South America
50 Hz
Generally used in Africa, Australia, Asia, and Europe
Advanced:
Turn on voltage
Input voltage threshold below which the unit does not turn on.
Ignition cut-off delay
Grace period between ignition cut-off and trunk unit power-down.
Undervoltage
Input undervoltage threshold that causes a unit shut-off if maintained for a certain time.