SharpZ3 base unit camera installation - SharpZ3 | SharpOS 13.1

AutoVu™ SharpZ3 Deployment Guide 13.1

Applies to
SharpZ3 | SharpOS 13.1
Last updated
2020-07-14
Content type
Guides
Guides > Deployment guides
Language
English (United States)
Product
SharpZ3
Version
13.1

Depending on configuration of your SharpZ3 system, you can connect up to four SharpZ3 cameras to the base unit.

The following image shows a SharpZ3 system with a four-camera ALPR module:
  Component Description
A SharpZ3 base unit Responsible for ALPR processing.
B Camera connector Remove the protective cap before connecting the camera cable.
C Sealed pressure equalizer Do not remove.
D ALPR camera ports The SharpZ3 Cat6a camera cable connects to the ALPR module with an RJ45 connector.
E Camera cable The SharpZ3 Cat6a camera cable connects to the SharpZ3 camera with an M12 X-coded connector.