There are several possible alignment configurations for SharpZ3 cameras. The correct configuration depends on your AutoVu™ deployment type and vehicle type.
The following table lists the most common alignment scenarios. Set up the tripod and align your
cameras using the X, Y, and D measurements in the following table in conjunction with
the instructions for setting up the
tripod.
If the provided alignment scenarios do not apply to your installation, contact your AutoVu™ representative.
Type of deployment | Your camera configuration | Car | Truck/SUV |
---|---|---|---|
Approximate height: 58.8 in. or 1.49 m |
Approximate height: 68.4 in. or 1.73 m |
||
Law enforcement | Front cameras | ||
Left and right cameras
|
|
|
|
Rear cameras | |||
Left and right cameras
|
|
|
|
On-street parking (city streets) | Front cameras only (no rear cameras in this configuration) | ||
Left and right cameras
|
|
|
|
Off-street parking (parking lots) | Wide row lots (two-way
traffic) Genetec Patroller™ tendency to drive closer to the right (for right-hand traffic flow) |
||
Left camera
|
|
|
|
Right camera
|
|
|