Attaching the target to the tripod - SharpZ3 | SharpOS 13.4

AutoVu™ SharpZ3 Deployment Guide 13.4

Applies to
SharpZ3 | SharpOS 13.4
Last updated
2023-02-03
Content type
Guides > Deployment guides
Language
English
Product
SharpOS
SharpZ3
Version
13.4

After you determine where to set up the tripod, you must attach the target to it, and raise it to the proper height for camera alignment.

Procedure

  1. Attach the three-arm knob to the tripod base using the provided wing nut.
  2. Attach the plastic thumb-head screw to the wing nut (both sides).
  3. Raise the tripod to its full length. The center of the target should be 36 in. (0.9 m) from the ground.