Depending on the type of vehicle the ToughPad mount is being installed in, you might need to install a universal base mount, or a base mount that is designed for the vehicle.
What you should know
Use these steps to install the following hardware:
- Base mount
- RAM-VB-109-3U (Genetec part number: AU-H-RAMSWING)
- Lower pole
- RAM-VP-TBF12U (Genetec part number: AU-H-RAMPOLEBOT12)NOTE: The lower pole is always shipped with the ToughPad mount hardware, however, the lower pole is only required if you are installing the universal base mount. If you are using a custom base mount, a lower pole is fused to the base mount.
| Component | |
|---|---|
| A | Lower pole |
| B | Universal base mount |
Procedure
- Assemble and install the base mount using the manufacturer's instructions.
- If the base mount you are installing includes a separate lower pole (A), attach it to the base mount using the manufacturer's instructions.