This section lists the settings found in the Auxiliary cameras page of the Sharp Portal. Use the Auxiliary cameras page to configure the ports of the SharpZ3 Aux PoE expansion module and to change PoE camera passwords.
To navigate to the Auxiliary cameras page, click .
The following information is displayed:
Wheel-imaging camera association
- Camera Unit
- Lists the installed SharpZ3 camera units.
- Associated AUX PoE camera
- You must associate the right and left wheel-imaging cameras with their respective
SharpZ3 camera units. Select the PoE
expansion module port where the associated wheel-imaging camera is connected. Tip: If you are not sure which port a wheel-imaging camera is connected to, check the video feed for the auxiliary cameras in .
Settings
- Change camera password
- AutoVu™
auxiliary PoE cameras use the default Username: admin and Password:
1234. If required by local regulations, you can change the camera password from
the Sharp
Portal instead of using the
camera's web portal.IMPORTANT: If you change the AUX PoE expansion module port connection after you change the password, you must reapply the password.