The AutoVu™ Installation Kit contains several tools used in AutoVu installations. The kit is recommended when installing SharpV and SharpZ3 camera units.
The following tools are included in the AutoVu Installation Kit:
- EZ-RJPRO™ HD Crimp Tool
- The SharpZ3 camera cable is pre-terminated with an RJ45
connector. If you shorten the camera cable, you must use the EZ-RJPRO™ HD
Crimp Tool and the provided replacement RJ45 connector. For more
information, see Terminating the SharpZ3 camera cable.NOTE: The tool can also be used in SharpV installations to crimp standard RJ45 connectors.
- Ferrule crimper
- A ferrule crimper is required when making connections to
the SharpZ3 base unit. For more information, see Wire ferrules for SharpZ3 installations.
The tool can also be used in SharpV installations if you are using ferrules for the I/O cable connection.
- Target license plate
- You must use the target license plate when you align the SharpZ3 cameras. For more information, see Aligning the SharpZ3 cameras.You can also use the plate to generate license plate reads to test the system.
- Cable tester
- If you shorten and terminate the SharpZ3 camera cable.
For more information, see Terminating the SharpZ3 camera cable.
- M12 x-code to RJ45 converter
- The M12 x-code to RJ45 converter is used when testing
SharpZ3 camera cables.
For more information, see Terminating the SharpZ3 camera cable.
- iX to RJ45 converter
- The iX to RJ45 converter is used to test cables for
devices connected to the SharpZ3 PoE expansion module such as AutoVu PoE
cameras.
For more information, see Installing a wheel-imaging camera.