After the hardmount is assembled, you can attach the SharpZ3 using the supplied hardware.
Before you begin
What you should know
- To attach the camera, you need the following tools:
- Phillips screwdriver
Procedure
-
Connect the two t-slot retaining strips to the bracket using the supplied flat
washers, serrated washers, and Phillips pan-head screws.
IMPORTANT: The flat washer must be installed against the bracket.
-
Slide the SharpZ3 camera onto the t-slot
retaining strips and tighten the screws with a Phillips screwdriver.
NOTE: Do not fully tighten the screws. You will need to readjust the angle during the final camera alignment.
Example
Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages.