Attaching the tablet mount to the tilt-pivot head - SharpZ3 | SharpOS 13.7

AutoVu™ SharpZ3 Installation Guide 13.7
Product
SharpZ3
Content type
Guides > Installation guides
Version
13.7
ft:locale
en-US
Last updated
2024-09-27

After the tilt-pivot head is attached to the tele-pole, you can attach the tablet mount to the tilt-pivot head.

Before you begin

Ensure that you have all of the required hardware:
  • Tablet mount
  • Tilt-pivot head
  • 4 x ¾" flat head screws
  • 4 x serrated flange nuts

What you should know

You must connect the tablet mount to the tilt-pivot head as shown before connecting the keyboard tray to the tablet mount.

Procedure

  1. The tablet mount (A) and the tilt-pivot head should both be able to tilt towards the user. Orient the tablet mount and the tilt-pivot head as shown.
    NOTE: The adjustment knob on the tilt-pivot head might be on either side depending on how it was assembled by the manufacturer.
  2. Connect the tablet mount (B) to the tilt-pivot head using the four ¾" flat head screws and serrated flange nuts in the mounting holes (C) shown in the following image.