If the patrol vehicle includes one of the supported lightbars, you can install SharpZ3 cameras using the lightbar mounting bracket.
What you should know
- The SharpZ3 lightbar mounting bracket is compatible with several lightbars from Whelen®, Code3, and SoundOff Signal®. To verify that your lightbar is compatible, contact your AutoVu™ Sales representative.
- When installing the spacer plate, the orientation of the plate depends on which side of the vehicle you are installing the cameras on.
- You can attach the pan bracket to either the left or right side of the tilt bracket. You can change the mounting position for a better fit at the end of the installation.
To complete these steps, you need the following:
- Socket wrench
- Phillips screwdriver
NOTE: The instructions and graphics in this section are for example only. Additional steps
might be required depending on the type of lightbar installed on the vehicle.
Example
Watch this video to learn more. Click the Captions icon (CC) to turn on video captions in one of the available languages.
After you finish
- Align the cameras so that license plates of passing vehicles are within the camera's field of view.
- Tighten the remaining fasteners on the lightbar mounting bracket.