There are many tasks involved in installing a SharpZ3 system for law enforcement. Use this overview as a reference to guide you through the process.
These are the tasks to perform while on site. If you can’t complete the tasks on this checklist, contact your AutoVu representative.
| Step | Task | Description | Where to find more information |
|---|---|---|---|
| 1 | Install the SharpZ3 base unit in the vehicle. | You can mount the base unit anywhere inside the vehicle that is safe, secure, and has good airflow. | |
| 2 | Install the SharpZ3 cameras on the vehicle. | Depending on the hardware ordered, systems can support either two or four SharpZ3 cameras. | |
| 3 | Install and configure the in-vehicle computer. | The in-vehicle computer must be powered through the base unit's auxiliary 8A Max relay. | |
| 4 | Align the SharpZ3 cameras. | You must align your SharpZ3 cameras using the AutoVu Installation Kit so they can read plates accurately. | |
| 5 | Complete the installation. | At the end of the installation you should test the system to ensure that the hardware is functional, and perform a read report to test performance. |