To enroll an Axis Powered by Genetec unit in Security Center, select an Access Manager role, configure the Synergis™ extension port, and add the unit to the role.
Before you begin
What you should know
Best Practice: If you have multiple Access Manager roles controlling Axis Powered by
Genetec units on the same subnet, ensure that they use different discovery ports.
Otherwise, you might experience performance issues.
Procedure
-
If required, change the Synergis extension
port to match the port configured on the unit:
- From the Config Tool homepage, open the Access control task, and click the Roles and units view.
- Select the Access Manager, and click the Extensions tab.
- Select the Synergis extension.
-
Select the discovery port and click Edit the item
(
).
- In the Discovery port dialog box, enter the port number configured for your units and click Save.