The Barco CMS plugin 4.2 includes the following known limitations.
| Issue | Description |
|---|---|
| 1586839 |
Barco CMS task: When in the Tree
view of the Barco tab, if you create or rename a display,
Perspective, or source, the component is not automatically reordered
alphabetically. Workaround: Close and then re-open the Barco
CMS task.
|
| 1010408 | A user can still share and unshare sources on Perspectives, even though the
user is configured to be denied the Share/Unshare perspectives
privilege. Workaround: The user with the denied privileges must log off
of, and log back in to Config Tool.
|
| 641787 | Video does not stream on the Barco wall when encryption is enabled in Security Center. Workaround: Disable
encryption on the Archiver or on the camera.
|
| 168289 | The backup and restore functionality of the Barco CMS is not supported. If you do perform a backup or restore, any Perspectives that were configured beforehand will no longer work correctly. |
| 159103 | You cannot delete a Perspective from the Barco CMS task while it’s being viewed
or edited by a Barco Sidebar user. Workaround: Close the Perspective in
Barco Sidebar.
|
| 158735 | After clearing the Draw grid lines option for a
Perspective, the option remains enabled the next time you select the
Perspective. Workaround: Clear the option again.
|
| 149793 | You cannot resize a source that represents a camera sequence in Barco
Sidebar. Workaround: Use the Barco CMS task in Security Desk to resize the
source.
|
| 114303 | Video feeds and camera sequences may take a long time to load in the CMS
system. Workaround: In Config Tool, on the
Video page of the camera, try increasing the Key
frame interval. Also, when creating a camera sequence in Config Tool, set the Dwell
time to a minimum of five seconds so the feed has enough time to
load before the next feed starts.
|