You can copy the user configuration from one intrusion panel to other intrusion
panels, so that the panels share the same user mappings, group mappings, excluded cardholders,
and general configuration settings.
Before you begin
Make sure you are granted the View
intrusion detection unit users and Modify intrusion detection
unit users privileges.
What you should know
This feature is only supported on
Bosch B series and G series intrusion panels in Mode 2. GV4 v2 panels do not
support this feature.Copying over user configuration can only be done from one intrusion panel to other
intrusion panels of the same model. Everything already configured on the
Users pages of the selected panels is overwritten by the copied
configuration.
Procedure
-
From the Config
Tool home page,
open the Intrusion detection task.
-
Expand the Intrusion Manager role from the entity browser, and select the
intrusion detection unit you want to configure.
-
Click the Users tab.
-
From the Configuration section, click the Copy
configuration button.
-
In the dialog box that opens, select an intrusion panel, and then click
OK.
Results
The intrusion panel you selected now shares the same user mappings, group mappings,
excluded cardholders, and general configuration settings as the panel you copied from. The
users in the user mappings table have the
Ready to push to add user to panel status.