Linking areas to inputs for a Map 5000 intrusion panel in Security Center - After an intrusion panel is added to Security Center , its components are automatically discovered. Groups are added as intrusion detection areas and points are added as inputs. You need to link the inputs to the appropriate intrusion detection areas so that you can work with the panels on maps. - Bosch Map 5000 intrusion panel 3.0

Bosch Map 5000 Intrusion Panel Extension Guide 3.0
Product
Bosch Map 5000 intrusion panel
Content type
Guides > Plugin and extension guides
Version
3.0
Release
3.0
ft:locale
en-US
Last updated
2023-08-03

After an intrusion panel is added to Security Center, its components are automatically discovered. Groups are added as intrusion detection areas and points are added as inputs. You need to link the inputs to the appropriate intrusion detection areas so that you can work with the panels on maps.

Before you begin

What you should know

When the unit connects to the panel, Intrusion Manager creates the intrusion detection areas, inputs, and outputs that are configured on the panel.
  • Intrusion detection unit are listed under the Intrusion Manager role in the Intrusion detection task.
  • Intrusion detection areas are displayed in the Area View task.
  • Inputs and outputs are listed on the intrusion detection unit's Peripherals tab.

Procedure

  1. In Config Tool, open the Area View task.
  2. Select an intrusion detection area, and then add the related inputs.

Results

The inputs and areas are listed in the Area View. You can now add cameras to the areas and inputs and create event-to-actions for them.

After you finish