Linking Security Center cameras to CCURE 9000 inputs - CCURE 3.5

CCURE Access Control Plugin Guide 3.5

Applies to
CCURE 3.5
Last updated
2019-12-16
Content type
Guides
Guides > Plugin and extension guides
Language
English
Product
C•CURE 9000 Access Control
Version
3.5

You can link Security Center cameras to CCURE 9000 inputs. When an event occurs at the input, the associated camera's video is displayed in Security Desk.

What you should know

You can link a camera to an input any time, even after the event has occurred.

You can assign multiple cameras to the same input. Alarms include the video from all assigned cameras. However, events only include video from the first camera that was added.

Procedure

  1. From the Config Tool home page, open the Plugins task.
  2. In the Plugins task, select the CCURE Access Control plugin from the entity browser, and then click the Cameras tab.
  3. Click Add (), select an input from the list, and then click Select.
  4. For each input, in the Cameras column, click Add (), select one or more cameras from the list, and then click Select.
  5. Click Apply.
  6. To view the camera's live video feed, click Preview ().
  7. To configure the camera's settings, click Open the camera's configuration page ().
  8. To remove a camera, click Remove ().

Results

When an alarm occurs for an input, the video from all linked cameras is displayed. When an event occurs for an input, only video from the first camera is displayed.
Tip: If you want an event to show video from a different camera, you must add it to the top of the list. To change the order of the cameras, remove all cameras, add the camera that you want to be visible in the event, and then add any other cameras.