Linking Security Center cameras to CCURE 9000 entities - CCURE 3.6

To view video related to CCURE 9000 access control events, Security Center cameras must be associated to CCURE 9000 access control entities.

To assign a Security Center camera to a CCURE 9000 door:

1. Open the Plugins task.
2. Select the door entity to configure, and click the Hardware tab.
3. In the Door side (Entry) section, click Associate a camera ().
4. From the Camera list, select a camera.
   If the camera has a PTZ motor, you can include the PTZ preset number to ensure that the camera points toward the door.
5. To add another camera to the door side, click Associate a camera () again.
6. Repeat the previous steps for the Door side (Exit).
7. Click Apply.

To assign a Security Center camera to a CCURE 9000 elevator:

1. In the Plugins task, select the elevator entity to configure, and click the Floors tab.
2. In the Cabin section, click Associate a camera ().
3. From the Camera list, select a camera.
   If the camera has a PTZ motor, you can include the PTZ preset number to ensure that the camera points towards the elevator.
4. To add another camera to the elevator, click Associate a camera () again.
5. To link a camera to each elevator floor:
   1. In the Floors section, select a floor and click Edit the item ().
   2. In the Floor properties dialog box, click Associate a camera ().
   3. From the Camera list, select a camera.
   4. Click OK.
   5. Repeat the previous steps for all elevator floors.
6. Click Apply.

To assign a Security Center camera to a CCURE 9000 area:

1. In the Plugins task, select an area and then click the Identity tab.
2. In the Relationships section, click Cameras, and then click Insert an item ().
3. Select the cameras that you want to link to your area, click Select, and then click Apply.

To assign a Security Center camera to a CCURE 9000 intrusion detection area:

1. In the Plugins task, select an intrusion detection area, and then click the Cameras tab.
2. Click Cameras, and then click Add an item ().
3. Select the cameras that you want to link to your intrusion detection area, click OK, and then click Apply.