To enroll a Cloud Link Roadrunner™ unit in Security Center, you must assign the unit to an Access Manager role.
Before you begin
What you should know
2000
. If you configured a different port in the unit's network
properties, you must also change it in Config
Tool to match.Best Practice: If you have multiple Access Manager
roles controlling Synergis™ units on the
same subnet, ensure that they use different discovery ports. Otherwise, you
might experience performance issues.
Procedure
-
If the unit does not use the default discovery port, change the Synergis™ extension discovery port to match
the port configured on your unit:
- From the Config Tool home page, open the Access control task, and click the Roles and units view.
- Select the Access Manager, and click the Extensions tab.
- Select the Synergis™ extension.
-
Select the discovery port and click Edit the
item (
).
- In the Discovery port dialog box, enter the port number configured for your units and click Save.
- Add the Cloud Link Roadrunner™ unit to the Access Manager role.