Supported access control features for Assa Abloy KS210 lock integration with Cloud Link Roadrunner™ 2.0 - Cloud Link Roadrunner™ 2.0.4

Cloud Link Roadrunner™ User Guide 2.0.4

Applies to
Cloud Link Roadrunner™ 2.0.4
Last updated
2022-09-15
Content type
Guides > User guides
Language
English
Product
Cloud Link Roadrunner™
Version
2.0

Not all Security Center access control features are supported with the integration of Assa Abloy KS210 locks.

The Assa Abloy KS210 lock integration supports the following Security Center access control features.
The following is the legend for some common values found in the Supported column:
Yes
Feature is supported by this integration.
Limited
Part of the feature is not supported.
No
Feature is not supported by this integration.
Online
Feature is supported only when the interface module is connected to the Synergis™ unit.
Not applicable
Feature does not apply to this integration.
Feature group Security Center feature Supported
Door behavior settings (overrides the Synergis™ unit-wide settings) Maintenance mode (keep door unlocked and ignore all access events) Yes
Standard grant time Yes
Extended grant time Yes
Entry time (Standard/Extended) Not applicable
Door relock - options Limited1
When door is unlocked by schedule - options Yes
Door held - options Yes
Door forced open - options Yes
Unlock schedules Yes
Request to exit (REX) options  
Unlock on REX (On/Off) Not applicable
Time to ignore REX after granting access (in seconds) Not applicable
Ignore REX events while door is open (On/Off) Not applicable
Time to ignore REX after door closes (in seconds) Not applicable
Visitor escort and two-person rule  
Maximum delay between card presentation (in seconds) No
Enforce two-person rule (On/Off) on Door side No
Manual actions on doors in Security Desk Manually unlock doors Yes
Reader shunting (activate/deactivate reader) Yes
Override unlock schedules Yes
Live event monitoring in Security Desk Module running state (Online, Offline) Yes
AC fail Not applicable
Battery fail (Low battery) Not applicable
Door open/closed Yes2
Door locked/unlocked Yes
Door forced open Yes
Door held open for too long Yes
Duress PIN Not applicable
Deadbolt (Secured, Released) No
Key override No
Area restrictions (for secured areas) Minimum security clearance (part of threat level management) No
Visitor escort rule (On/Off) No
Interlock No
Antipassback  
Hard (log and deny access on Antipassback violation) No
Presence timeout (forget area presence after a certain delay) No
Strict (antipassback checked on both area entrance and exit) No
On schedule No
Max occupancy No
Global antipassback No
First-person-in rule  
Enforce on door unlock schedule No
Enforce on access rules No
Elevator control Elevators Not applicable
Zone management I/O zone No
Hardware zone No

1 If the KS210 lock relocks immediately after opening, in the Door relock option, select after opening and enter a value. For example, five seconds. Selecting On close is not supported.

2 Refer to the wiring instructions included with the KS210 lock.