Testing OSDP readers and I/Os on the Cloud Link Roadrunner™ unit - Cloud Link Roadrunner™ 2.0

Cloud Link Roadrunner™ User Guide 2.0
Product
Cloud Link Roadrunner™
Content type
Guides > User guides
Version
2.0
Language
English
Last updated
2022-07-28

You can test your hardware connections and configuration in real time by monitoring their responses on the I/O diagnostics page.

Before you begin

Configure the OSDP readers.

What you should know

You can customize the page to show the elements you want to monitor.

Procedure

  1. Log on to the Cloud Link Roadrunner™ unit.
  2. Click I/O diagnostics > Interfaces.
  3. Click to expand the interface you want to monitor.
  4. Activate the devices connected to the unit.
    If they do not behave as expected, check your connections and your OSDP reader configurations.

After you finish

Associate the peripherals (readers, inputs, outputs, and so on) controlled by this unit to doors and zones defined in your system.
NOTE:
  • Cloud Link Roadrunner™ units do not support peer-to-peer, and I/O zones should not be used with Cloud Link Roadrunner™ units.
  • When creating doors controlled by a Cloud Link Roadrunner™ unit, leave the Interface module as Not specified.

For more information about deploying Synergis™, see Deploying your access control system.